Dr. Ron Weighs in on RoHS Status and RoHS 2 Concerns
Folks, I was asked to guest blog for All-Spec. The topic I choose was the status of RoHS and RoHS 2 concerns. Check out the post.......
Folks, I was asked to guest blog for All-Spec. The topic I choose was the status of RoHS and RoHS 2 concerns. Check out the post.......
Folks, 1. APEX appeared to be a big success. The Las Vegas venue also seemed to be a big hit. Since I’m not a big fan of gambling or smok...
Folks, About two years ago it appeared that SAC305 (3.0% silver, 0.5% Cu, the balance tin) was becoming the de-facto standard for Pb-Free assembly. Wi...
David writes, Dear Dr. Ron, I thought you would find the article below of interest. Is appears that now there is more than just Occam to worry about. ...
Folks, In my blog posting of December 1, 2005, I asked PC Magazine’s “Cranky Geek” John Dvorak about his knowledge of RoHS. H...
Folks, I wanted to post this before today’s CA World Golf Championship and I promise to get back to more technical topics. But part of this post...
Folks, In 2002 Phil Zarrow, Jim Hall and I worked with the folks at SMTA to develop a Certification Program for SMT Process Engineers. Hundreds have.....
Folks, This past week I attended a Medical Device Manufacturing Conference put on by Q1 productions. I had the honor of being the kick off speaker and...
Folks, The team at Circuitnet has performed a poll on lead-free line usage. They asked the question: As we enter 2008, what percentage of your product...
Folks, I continue to receive regular requests for the Excel spread I developed that calculates alloy densities. We have a new improved (looks more att...
Folks, My colleagues at Indium Corp tell me that some major companies are now starting to specify maximum halogen levels in solder paste flux residues...
Folks, Recently the concern for e-waste has hit the mainstream media. The most thorough article being in National Geographic with supporting articles ...