Preparing Surfaces for a NanoBond®
The first time I was taught how to solder (as a child), I was told: “All the surfaces need to be mechanically cleaned and chemically cleaned.&rd...
The first time I was taught how to solder (as a child), I was told: “All the surfaces need to be mechanically cleaned and chemically cleaned.&rd...
While on a recent trip to Malaysia, I interviewed two colleagues regarding trends in semiconductor assembly. My previously-published interview with Sz...
When helping customers with the optimization of their soldering process, the question often comes up; “What will my solder bond line thickn...
The Indium Corporation has developed a new solder research kit designed specifically to meet the needs of medical manufacturers who are soldering to N...
Folks, Let’s see how Patty and Pete are making out on their latest adventure…. “Here is the ProfitPro™ output,” Dave...
Here is a picture of an Indium Corporation solder flux pen, sectioned to show you the internals. Who DOESN’T want to see THAT, right?!? Fl...
When I began blogging for Indium Corporation, I was unsure what value I could really add for our readers. Sure I could discuss technical topics, but w...
It won’t be long until we in the northern hemisphere are complaining about the snow and the cold, but right now, it is all about the heat! ...
Folks, It is hard to believe that I have been blogging for over 7 years now. In all this time it has surprised me how much interest there has be...
Folks, There is a lot of interest in cleaning PCBs that have been assembled with no-clean solder pastes. Recently I discussed the topic with my ...