Gallium-Indium Liquid Metal Self-Healing Electronics, Part 4 of 5
What are some real-world applications for stretchable electronics made of gallium and indium - both near-term and long-term?...
What are some real-world applications for stretchable electronics made of gallium and indium - both near-term and long-term?...
Self-healing electronics seems moer like magic than science. The secret to this magic is the unique material architecture....
Brook Sandy-Smith, Technical Support Engineer for PCB Assembly Materials, and Phil Zarrow, discuss approaches for reaching near zero voiding and how v...
Jim Hisert discusses the composite material that is electrically insulating until it is patterned, at which point it becomes conductive....
Jim Hisert discusses the future of self-healing electronics with Eric Markvicka of Carnegie Mellon University....
The second stage of a reflow profile activates the flux in the solder paste and prepares the solder for reflow. This can be a critical stage...
It is important to consider both the solder alloy density and the diameter of the wire when determining the ideal flux percent. This blog post tells&n...
It is important to understand the different stages of a reflow profile and how they can affect the end solder joint. ...
Indium shot is a bulk form of indium metal that is shaped like a small tear drop that can be used as an alternative to cutting or shaving indium ingot...
How I overcame my writer's block to re-energize my technical and creative blog writing. A change of focus - and scenery - was ...
GaIn alloys are non-toxic and not highly reactive, making them ideal for use in many liquid metal applications....