The Rewards of Challenging Work
A professor told me (on many occasions), “work smart, not hard”. Although he had good intentions, he was not a great mentor – as eve...
A professor told me (on many occasions), “work smart, not hard”. Although he had good intentions, he was not a great mentor – as eve...
Engineered solders are solders that can make a HUGE difference with your thermal management, IGBT, die-attach, medical device, hermetic sealing, or co...
It is no secret that automotive semiconductor customers are becoming increasingly demanding. The “under the hood / bonnet” electronics env...
NanoFoil®requires a threshold of energy to activate. What happens if that energy value is not met?: Interdiffusion and inhibition of the NanoBond&...
Indium Corporation recently received recognition for some Marcom results. I was asked to comment. Amongst my responses was this: “I was once tol...
Many surface finishes are solderable with the right flux. Many of our electronic devices use solder to bond copper, silver, gold, and other metals, bu...
As the world began transitioning to Pb-Free solder in the early 2000’s, the electronics industry determined that SAC387 (95.5Sn/3.8Ag/0.7Cu) was...
In a previous post, one of our experts clarified that Nanotechnology is about more than just a physical size-range, it’s about the unique proper...
Here at Indium Corporation we use punch presses to die cut NanoFoil® for our NanoFoil® research kits. We use this equipment to singulate the m...
A while back I wrote a series of posts regarding corrosion. Since I have been at the Corrosion 2013 tradeshow this week, I’ve decided to resurre...
Folks, I am a global warming skeptic. This term, however, requires some explanation. I believe in climate change. The climat...
Let’s start with a bit of fiction to get us on the same page… Mike is working with NanoFoil®, getting ready to bond a small, round, p...