ELV Legislation Update (I)
Under-the-Hood: The “Death Valley” of Power Electronics New insights in April into changes in the European ELV (End-of-life vehi...
Under-the-Hood: The “Death Valley” of Power Electronics New insights in April into changes in the European ELV (End-of-life vehi...
This year we tried to plan something a little different for APEX. Instead of the normal booth,......
In addition to Au/Sn sputtering pucks, Indium Corporation can also manufacture full size Au/Sn sputtering targets. 80Au/20Sn is......
Solder Die Attach Image Courtesy of memsonics.com The clock is ticking before the extension of Pb-free legislation for high Pb-containi...
Folks I was chatting recently with Indium Corporation’s Mike Fenner about Sn/Cu alloys for solder paste. Mike has many years of experience ...
The Insulated Gate Bipolar Transistor (IGBT) module is rapidly taking over from MOSFET technology as the solid-state power switch of choice. Die-attac...
Indium Corporation is a big proponant of using the EN14582 oxygen bomb test method for halogen determination. However, we have seen misleading r...
A small selection of our Pb-free solder alloys In possibly one of the quietest revolutions in the history of Power Semiconductor electronics manufactu...
Welcome to the Power Semiconductor Assembly Blog, Indium Corporation’s information watercooler for the Power Semiconductor assembly industry. So...
Tim Jensen is one of the leading experts on the “green” movement. Tim hosts the Halogen-Free Blog......
Following the success of NC-506 (No-Clean flux for mounting spheres on BGA packages) is a halogen-free version – NC-585.span......
Once you have an understanding of the type of solder needed for an application, (a hard solder such as AuSn for reflow temperatures above 125&d...