Soldering: an Indian Engineer's Perspective!
Hi there! I am excited, this is my first blog post -ever. I am excited that it is a technical blog of Indium Corporation. My story is very ...
Hi there! I am excited, this is my first blog post -ever. I am excited that it is a technical blog of Indium Corporation. My story is very ...
Solder powder particle size and shape impacts the functionality of solder paste in many ways: printing/dispensing/dipping; solderballing; graping; voi...
Solder wire is generally used for manual soldering operations, including rework. But, it can......
Typical Tabbing Ribbon Solders img width="400" align="right" height="301" src="https://cdn2.content.compendium...
Folks, I have often pointed out that SAC solder’s poor wetting is both a curse and Godsend. It is a curse when trying to fill ...
Many, many thanks to the hundreds of you who came by the Indium Corporation booth at Semicon West this year. Some of you came to hear about ...
For reasons that I will discuss in a post later this year, a common factor that is emerging in the area of copper-pillar microbump 2.5D and 3D jo...
Included in a solder paste‘s Product Data Sheet, among other things, are general guidelines which aid the customer in designing a...
Unbeknowst to me, the refrigerator where I store my solder paste and fluxes that I use for SIR (Surface Insulation Resistance) testing was.....
Folks, A few people asked some questions after my last post on bismuth solders. Here they are:......
This post was prompted by a Korean customer, who this month asked what the limitations are for aqueous (water-based) cleaning for fluxes used in ...