Weibull Analysis III: Multiple Failure Modes
Folks, Our discussion of Weibull Analysis continues…..Let’s say you have worked hard and assembled some SMT lead-free PCBs for thermal c...
Folks, Our discussion of Weibull Analysis continues…..Let’s say you have worked hard and assembled some SMT lead-free PCBs for thermal c...
Folks, In continuing our discussion on Weibull Analysis, let’s assume we assembled some SMT and through-hole PCBs with lead-free solder paste....
Folks, Let’s step away from electronics assembly challenges, and deep considerations of solder paste, solder preforms, and wave soldering, ...
One question that I often hear from customers is; “Once out of the refrigerator, how long do I have to wait to allow my solder paste and/or flux...
When designing a Package-on-Package (PoP) assembly process, there are many variables that need to be considered in order to be successful. While...
We’ve heard about the solder paste “graping” defect, but the same oxidation challenge occurs in other solder forms as well, such as ...
前段时间我们接触了“Strategic Selling” 和 “Conceptual Selling”į...
There are a lot of parameters to consider when choosing the right solder for your application: 1) The operational temperature of the final device p st...
Over the years, solder alloy choices have been pretty stable. In the last century, SN63 and SN62 could be found at any company making any k...
It is hard to believe, but 50 years ago, on October 9th, the first visible light LED was demonstrated by Nick Holonyak, Jr. of GE Advanced......
When helping customers with the optimization of their soldering process, the question often comes up; “What will my solder bond line thickn...
Folks, Let’s see how Patty and Pete are making out on their latest adventure…. “Here is the ProfitPro™ output,” Dave...