Avoiding the Void in Flux-Cored Solder Wire
Voiding within a flux-cored wire material can be a serious hindrance to operational efficiency. Avoid The Void!...
Voiding within a flux-cored wire material can be a serious hindrance to operational efficiency. Avoid The Void!...
It is important to consider both the solder alloy density and the diameter of the wire when determining the ideal flux percent. This blog post tells&n...
Robotic Soldering II After reading my last post on robotic soldering, you have decided that you have a good robotic soldering application and want to ...
I found this to be a good introduction to the fundamentals of hand soldering - and I think you will too. Please pass this along to the creative p...
Gold-based solder alloys have superior strength and conductivity; perfect for applications requiring a high temperature, reliable bond that can hold u...
Generally in the world of solder, once a solder preform or section of wire is reflowed it has been consumed and there is not any need to consider what...
The next few posts come to us from my colleagues Karthik Vijay, Indium Corporation’s Technical Manager for Europe and Liam Mills of TT Electroni...
There are many types of wave solder machines, each with their own quirks, characteristics, and personalities. The good news is, each has the same core...
Here at Indium Corporation we produce many forms of solder. With products like solder ingots, solder paste, and solder wire, we supply the alloys our ...
This is an account of my trip to Indium’s Chicago facility. If you didn’t get a chance to read my previous post, the link is right he...
The Indium Corporation recently had a customer contact us looking for 50In50Pb solder wire. We manufacture large amounts of this indium-lead mat...
Round solder wire, especially flux-cored, has been a mainstay of the electronics industry ever since electronics came into existence. Round solde...