The final piece of the puzzle
There is nothing more frustrating than going through an entire process (whether it is putting together a puzzle or manufacturing a product) only to fi...
There is nothing more frustrating than going through an entire process (whether it is putting together a puzzle or manufacturing a product) only to fi...
Folks, While at SMTAI a few weeks ago, I ran into Patty. She agreed to sit down for an interview. Here it......
In an earlier post, I mentioned how hard it was to get technical support from some equipment vendors. In......
As a supplier of electronics materials, Indium Corporation is constantly faced with customer requests for “halogen-free” (HF) soldering fl...
Source: Amkor The new TVM™ PoP components......
Folks, The adventures of Patty and The Professor continue….. Patty and The Professor agreed to work with two of the local process engineers to...
I just sat down to talk to Tommy Acchione (pronounced “akki-OWN”) Applications Engineer with Indium Corporation’s new product ...
This is a blog post about a great post that may never be… Unless a solder iron vendor wants to step up and declare that they offer technical su...
Once the flux has been formulated and scaled up it then must be mixed with solder powder. The mixing procedure and equipment must be capable of provid...
Folks, Recently, I ran into The Professor. He graciously agreed to an interview. The following is the discussion from our meeting....
I polled some of our field sales force to find out what common questions customers ask them. You (the reader) probably have similar questions.&n...