Ball-Attach Flux WS-446-NRD for Poor Quality OSP-wetting
While on a recent trip to Malaysia, I interviewed two colleagues regarding trends in semiconductor assembly. My previously-published interview with Sz...
While on a recent trip to Malaysia, I interviewed two colleagues regarding trends in semiconductor assembly. My previously-published interview with Sz...
Folks, Let’s see how Patty and Pete are making out on their latest adventure…. “Here is the ProfitPro™ output,” Dave...
It is summer time again in the Northern Hemisphere and many places, especially in North America, are experiencing record heat. It also seems that most...
Folks, It has been a while, let’s look in on Patty…... Patty had to admit that she was very fortunate. She had yet to t...
About a month ago I posted about the various 3D technologies (chip creation, packaging and printed circuit boards) that are being used to op...
Folks, This year will mark the 10th anniversary of SMTA’s SMT Process Certification Course. This course was developed by Jim Hall, Phil Za...
Folks, There is a lot of interest in cleaning PCBs that have been assembled with no-clean solder pastes. Recently I discussed the topic with my ...
Browse the coming attractions at your local movie theater. How many 3D movies are being advertised? 3D is a very exciting technology for m...
Okay, I have to admit I was wrong… I used to have a bias against L-Shaped bus ribbon. “Why not just use available continuously spooled ri...
Folks, If you need to take a break from topics such as solder paste, solder preforms, tin whiskers, indium TIMs etc, there are a few books I would r...
It is not often that we get a request for SIR (Surface Insulation Resistance) and/or ECM (Electro-Chemical Migration) results for a water washable/sol...
Folks, Struggling to find a good, royalty-free, video of electronics assembly, my Dartmouth ENGM 185 class on manufacturing processes decided t...