InTEGRATED Solder Preforms
Have you ever had to hand-place solder washer preforms on the pins of a connector and found it to be very labor intensive? Indium Corporation has a pr...
Have you ever had to hand-place solder washer preforms on the pins of a connector and found it to be very labor intensive? Indium Corporation has a pr...
Tabbing Ribbon Solar tabbing ribbon typical consists of 10-15 micrometers of solder alloy coated on OFHC or ETP copper strip. SN60, (60% tin and 40% l...
A recent topic which has come up in the soldering world has been the push for halogen-free or halide-free fluxes. There are many reasons customers are...
If you are new to Package-on-Package solder paste, expect the material to be lower viscosity then you are used to for printing or even dispensing appl...
When considering the choice of flux for preforms, in addition to factoring in the amount of flux required on a preform, the type of flux is also impor...
I recently read an article at Development Monkey by Karen Field about how Development Kits are growing in popularity with Design Engineers. She report...
Folks, About two years ago it appeared that SAC305 (3.0% silver, 0.5% Cu, the balance tin) was becoming the de-facto standard for Pb-Free assembly. Wi...
Soldering is quite a bit like cooking a gourmet dinner: there are raw materials, a process for putting them together, a heating temperature and time, ...
David writes, Dear Dr. Ron, I thought you would find the article below of interest. Is appears that now there is more than just Occam to worry about. ...
Folks, In my blog posting of December 1, 2005, I asked PC Magazine’s “Cranky Geek” John Dvorak about his knowledge of RoHS. H...
There is a significant push in the electronics industry to produce “halogen-free” products in order to be more environmentally friendly. ...
It seems that the topic of Halogen-Free Solder Paste has grown by another leap and bound. The big confusion is what are the definitions of Halogen-Fre...