Indium Recycling – End of the Year Clean-up
When you are doing your year-end clean-up, check to see if you have any indium seals or scrap pieces of indium laying around. Send us your scrap indiu...
When you are doing your year-end clean-up, check to see if you have any indium seals or scrap pieces of indium laying around. Send us your scrap indiu...
Today we are speaking with Kim Flanagan (Technical Support Engineer) about specifying cryogenic seals....
I recently had a conversation with Shamaine Engler (Technical Specification Administrator for Indium Corporation) about indium metal in cryogenic seal...
Indium preforms offer very precise volumes of solder, and are cut to fit some very interesting bond-line shapes. Some examples of preform applications...
Indium ribbon can be made to various widths and thicknesses. It may also be called “foil” if it is over 4 inches wide. It is easily cut to...
Indium wire is very different than the solder wire you find in hardware stores. To me, it’s like comparing a sports car and a go-kart. Each perf...
Spheres are the form of indium I use the most for testing solder wetting properties, because they have a precise volume. (As opposed to shot, which do...
I clearly remember the first time I saw indium ingots. I had only been employed at Indium Corporation a few days. Outside an alloying room I noticed a...