Join Tim Jensen and Me at our Halogen Free Workshop at SMTAI at DisneyWorld in August

Folks,

SMTAI   is at DisneyWorld again this year from August 17-21.  My wife and I are arriving early and bringing some of our grandkids for some fun at the Magic Kingdom etc.

Tim Jensen and I are teaching what we believe is the first ever workshop on halogen free assembly.  Come and join us!  You can register here .  In addition to discussing the "how tos" of halogen free assembly, we will also discuss why it is happening. 

Cheers,
Dr. Ron

Share your thoughts by COMMENTING. Or, email the blogger at rlasky@indium.com.

Posted by Dr. Ron Lasky on July 6th, 2008 at 2:07 PM

↑ top of page

← Back to Blog Home Page

Email Dr. Lasky

rlasky@indium.com

Recent Entries

• Bismuth Solders
• Step 2 to Consider When Designing a Trouble-Free Solder Joint
• The Importance of a Trouble-Free Solder Joint
• Steps to consider when designing a trouble-free solder joint:
• Inexpensive Solder Preform Prototypes
• Hand Soldering Tip Temperatures
• Substrate Cleaning for Good Solderability-Solder Fluxes and Alternatives
• Meet the Bloggers at SMTAI
• Solder Alloy Density Calculator
• Maximum Solder Temperature

The opinions expressed here are the personal opinions of Dr. Ronald C. Lasky. Content published here is not read or approved by the Indium Corporation and does not necessarily represent the views and opinions of the company. In addition, they are not guaranteed to be correct, complete, or up-to-date. By using this blog site you understand that any information or advice is of a general nature and may not apply to your specific situation. It is the reader’s responsibility to confirm and verify all information prior to implementing any endeavors based on the information. This blog/website should not be used as a substitute for competent personal advice from a trusted professional.