Indium Corporation manufactures die-attach solder paste, such as Indium8.9-LDA, for vacuum soldering. Indium Corporation's IGBT die-attach solder paste can be screen printed or stencil printed and is easy to clean.
Indium Corporation also provides solder ribbon and solder preforms for die-attach applications. Tape & reel packaging allows preforms to be advanced and placed with speed and accuracy. Semiconductor-grade ribbon and preforms come in ultra-pure alloys and adaptable packaging, such as tape & reel, custom spools, and cartridge packs, to increase productivity, performance, and efficiencies.
All material is recyclable and reclaimable.
Materials for Vacuum Soldering
Direct Bonded Copper (DBC) or Substrate-Attach
Indium Corporation's soldering materials for DBC-attach include solder ribbon and solder preforms. Manufactured for purity, they offer low voiding when reflowed in air or vacuum.
InFORMS® were developed to solve the non-planar solder joint issue common in substrate bonding. InFORMS® are reinforced solder alloy fabrications that ensure parallel soldering at a predetermined bondline thickness.
NanoFoil® solders a component in nanoseconds without using a reflow oven. NanoFoil® provides a localized heat source that enables high strength, high conductivity bonding between most combinations of materials. NanoFoil® emits enough energy to solder 25-150+ micron bondlines. In addition, tin-plated NanoFoil has been used to solder gold-plated substrates together without the need for a reflow oven or any plating. For more information, visit www.indium.com/nanofoil/.
Materials for Substrate-Attach
Heat-Sink or Baseplate-Attach
Removing heat from a power module is important for ensuring interconnect reliability. Indium Corporation's Heat-Spring® material is a non-reflow compressible metal pad with a thermal conductivity of 86W/mK. Unlike some of the more typical thermal interface materials, such as thermal grease, Heat-Springs® do not pump out or bake out.
Heat-Springs® can be engineered and optimized for difficult applications and a wide variety of surface conditions. Minimum pressure required is 25-45psi and minimum thickness is 75 microns. Custom packaging includes tape & reel and tray packs. See our application note entitled "Heat-Spring® Metallic Thermal Interface Materials for Application to Infineon Technologies AG PrimePACK IGBT Modules" for information on how Indium Corporation's Heat-Springs® performed in testing against a comparable flat indium shim and two typical silicone-based thermal grease materials.
Liquid metal is another material that can be used as a thermal interface. Liquid metal is RoHS-compliant and has a thermal conductivity of 40W/mK and a contact resistance of virtually zero.
Materials for Heat-Sink or Baseplate-Attach
Top IGBT Technical Documents
New Developments in High Performance Solder Products for Power Die Assemblies (Paper)
IGBT and Engine Control Technical Documents
No application notes to display
Product Data Sheets
No product data sheets to display
Safety Data Sheets
No safety data sheets to display
Thermal Management Blog Posts
I just can’t get enough of a good thing. My last post mentioned donuts – one of my favorite treats. Allow me to continue reveling in the chewy sweet delight. On Saturdays the kids like to be taken for donuts; it usually doesn’t take much convincing. But, it’s not…
Folks, Some years ago, a leading IC manufacturer decided that their R&D effort could benefit if analyzed for possible improvement - by hiring professionals from the arts (e.g. singers, actors, artists etc.) In this spirit, I am going not quite so far from electronics assembly, to ask one…
Solder seems pretty simple, and, honestly, it doesn’t always need to be overly technical. But, many SMT, semiconductor, thermal management, and solar applications do require a good amount of technical knowledge. Below are some general areas of concentration that help with these lines of work: Materials…
Assistant Product Manager
From One Engineer to Another®
All of Indium Corporation’s products and solutions are designed to be commercially available
unless specifically stated otherwise.
Indium Corporation — ©1996–2014. All Rights Reserved. | Site Map