VOC-free fluxes use water as the dominant solvent. In addition to limiting the amount of volatile organic compounds (VOC) into the atmosphere, sometimes associated with global warming, VOC-free fluxes are also non-flammable. The disadvantage of VOC-free/water-based fluxes is that they require more pre-heat to drive off the water than similar alcohol-based fluxes. In addition, assemblers must be careful to ensure that the top side of the circuit board is dry, otherwise it could lead to reliability issues in the form of electromigration.
|Formula||Acid #||Solids %||S.G.
|1072||25||5.0||1.017||ORL0||ROL1||< 0.35%||Spray||16-1072||VOC Free high reliability, Solubilized Rosin|
|1075-EX30||30||2.9||1.014||ORL0||ORL1||< 0.5%||Spray||N/A||VOC Free Very Low Solids|
|1075-EXR30||30||4.5||1.015||ORL0||ORL1||< 0.5%||Spray||N/A||VOC Free Moderate Low Solids|
|1075-EXR40||40||5.0||1.019||ORL0||ORL1||< 0.5%||Spray||N/A||VOC Free Low Solids|
|WF-7742||35||5.8||1.014||ORL0||ORL1||< 0.3%||Spray||N/A||High Activity, VOC Free, Low Solids|
|WF-7745||39.5||4.2||1.013||ORL0||ORL0||< 50 ppm||Spray||N/A||VOC Free Halogen Free, Higher reliability|
Fluxes are available in 1-gallon and 5-gallon containers, and 55-gallon drums.
Related Markets and Applications
VOC-Free Flux Technical Documents
No whitepapers to display
No presentations to display
No application notes to display
Product Data Sheets
Safety Data Sheets
No safety data sheets to display
Flux Blog Posts
In this installment of Tech Seconds, Phil summarizes the two primary criteria for selecting a wave flux.
You shouldn’t base your solder flux selection on just one data point.
Application Engineers read data for trends - providing better long-term answers.
From One Engineer to Another®
All of Indium Corporation’s products and solutions are designed to be commercially available
unless specifically stated otherwise.