Submit an Abstract to SMTA PanPac
This coming February will be my third SMTA PanPac. PanPac is a very enjoyable and rewarding conference with a full venue. Costs are reasonable as well...
No posts matching your request were found
Browse the most recent posts below
Reflow Oven Sizing Spreadsheet
Folks, A short time ago, I posted on how to size a reflow oven. I mentioned that I had developed an Excel Spreadsheet to perform the calculations. The...
Driving the Packaging Frontier: Part 2
Indium Corporation’s Sze Pei Lim, talks about when to make th emove from water-soluble to no-clean fluxes for flip-chip assembly packages....
Specifying Dimensions for Pure Indium Preforms
We have all ordered something in the wrong size - it’s frustrating! Today we discuss specifying the dimensions for pure indium preforms....
Response to Pause: A Critical Solder Paste Parameter
A good solder paste should be able to remain in a paused position (i.e. not being printed) on the stencil, for more than an hour....
Specifying Indium Preform Purity
Indium is commonly available from 99.9% to 99.9999% purity, although 99.995-99.999% is recommended most often for vacuum, hermetic, and cryogenic seal...
The Importance of Tension on Fine Diameter Cored Wire in Robotic Soldering Applications
Thoughts on the importance of tension in the robotic soldering process....
Driving the Packaging Frontier: Part 1
Indium Corporation’s Dr. Andy Mackie, Senior Product Manager, Semiconductor and Advanced Assembly Materials, and Sze Pei Lim, Regional Manager, ...
Cold Welding: All Metals Versus Indium
All metals can be cold welded. Indium is unique in that it can cold weld to itself at extremely low pressure....