REACH-Compliant Solder Fluxes for Europe
One of the key components of the soldering process is the flux. Without the right flux to remove the oxides, then you can end up with a poo...
One of the key components of the soldering process is the flux. Without the right flux to remove the oxides, then you can end up with a poo...
Generally in the world of solder, once a solder preform or section of wire is reflowed it has been consumed and there is not any need to consider what...
Have you ever had to choose something (a new computer, kitchen cabinets, eyeglasses) and had so many choices that you became overwhelmed and got analy...
New developments are happening almost daily in the electronics device world: phones that do much more than just convey voice, clothing that monitors a...
Dave Letterman, of late night talk show host fame, has made the Top Ten List a popular vehicle for comedy, but it is also often used to convey useful ...
Being the Indium Corporation, we know what indium is, where it comes from, and how to use it. But sometimes we forget that not everyone is as im...
The 2013 IPC APEX Expo , the premiere electronics assembly event, is right around the corner – and our technology experts are ready to share the...
There have been a variety of people who were key to the development of indium metal in general, and Indium Corporation in particular, over the ye...
There are a lot of parameters to consider when choosing the right solder for your application: 1) The operational temperature of the final device p st...
Over the years, solder alloy choices have been pretty stable. In the last century, SN63 and SN62 could be found at any company making any k...
It is hard to believe, but 50 years ago, on October 9th, the first visible light LED was demonstrated by Nick Holonyak, Jr. of GE Advanced......