Posted On: August 18th, 2019 | By: Jim Hisert

Specifying Indium Preform Purity

Indium is commonly available from 99.9% to 99.9999% purity, although 99.995-99.999% is recommended most often for vacuum, hermetic, and cryogenic seal...

Posted On: August 11th, 2019 | By: Jim Hisert

Specifying Pure Indium Solder Preforms

How to get the right pure indium solder preform to work with your application....

Posted On: August 8th, 2019 | By: Meagan Sloan

Cold Welding: All Metals Versus Indium

All metals can be cold welded. Indium is unique in that it can cold weld to itself at extremely low pressure....

Posted On: August 4th, 2019 | By: Jim Hisert

The Complete Introduction to Pure Indium Preforms

Buckle-up and prepare to geek-out, because you’re about to learn all the basics of specifying, making, and applying pure indium preforms....

Posted On: July 31st, 2019 | By: Meagan Sloan

Eutectic vs. Non-eutectic Solder Alloys

Every alloy has both a solidus and a liquidus melting temperature. The solidus temperature is the point when the alloy just starts to melt. ...

Posted On: July 12th, 2019 | By: Meagan Sloan

The Result of Cold Welding Indium

Indium metal cold welds to itself. Let's start discussing this phenomena....

Posted On: May 20th, 2019 | By: Jim Hisert

Interview: Properties and Application of Indium Metal (Part 5)

Part 5 of the AZO Materials interview with Carol Gowans. ...

Posted On: May 13th, 2019 | By: Jim Hisert

Interview: Properties and Application of Indium Metal (Part 4)

Part 4 of the AZO Materials interview with Carol Gowans. ...

Posted On: May 6th, 2019 | By: Jim Hisert

Interview: Properties and Application of Indium Metal (Part 3)

Part 3 of the AZO Materials interview with Carol Gowans. ...

Posted On: April 29th, 2019 | By: Jim Hisert

Interview: Properties and Application of Indium Metal (Part 2)

Part 2 of the AZO Materials interview with Carol Gowans...

Posted On: April 22nd, 2019 | By: Jim Hisert

Interview: Properties and Application of Indium Metal (Part 1)

Why does indium metal play such an important role in so many cutting edge technologies? Tune into Part 1 of the AZO Materials interview with Carol Gow...