Pb-Free Bar Solder Dilemma: Price vs. Performance
Many consumer electronics transitioned to Pb-Free 4-5 years ago. However, there are still a substantial number of electronics being built with S...
Many consumer electronics transitioned to Pb-Free 4-5 years ago. However, there are still a substantial number of electronics being built with S...
Forming gas is a complicated topic, so I will provide some preliminary background in this section, then get into the soldering part next time. Don&rsq...
Today I made my rounds in the office, collecting ideas for you from our tech guys – ideas to help you speed the alloy and flux s...
Conductive epoxy is a common material choice for bonding components, especially if the assembly process is temperature-sensitive. Tin-based solde...
I have been asked on numerous occasions to calculate the potential for galvanic corrosion between metals. Most times, when I am approached with t...
After just finishing her department’s monthly activity report, Patty took a break to stare out of her window, admiring the beauty of last night&...
The use of gold layers deposited onto nickel is standard in many industries, from DRAM memory module edge connectors, to electrical test probe co...
Generically, a phase change material is one which will store or release energy when it changes phase from solid to liquid or liquid to solid. Acc...
In an earlier post, I mentioned how hard it was to get technical support from some equipment vendors. In......
As a supplier of electronics materials, Indium Corporation is constantly faced with customer requests for “halogen-free” (HF) soldering fl...
I just sat down to talk to Tommy Acchione (pronounced “akki-OWN”) Applications Engineer with Indium Corporation’s new product ...