Indium Experts at APEX EXPO 2013
The 2013 IPC APEX Expo , the premiere electronics assembly event, is right around the corner – and our technology experts are ready to share the...
The 2013 IPC APEX Expo , the premiere electronics assembly event, is right around the corner – and our technology experts are ready to share the...
NanoFoil® is a great localized heat source, but it can cause some ugly looking aesthetic defects if the process is not set up correctly. Let̵...
There have been a variety of people who were key to the development of indium metal in general, and Indium Corporation in particular, over the ye...
Folks, A while ago I discussed the Weibull Distribution and its importance in electronics reliability analysis. This distribution has been use...
Using NanoFoil®can be very easy, and there are many things you can do yourself to make prototyping or production easier, save money, and get the r...
One question that I often hear from customers is; “Once out of the refrigerator, how long do I have to wait to allow my solder paste and/or flux...
We’ve heard about the solder paste “graping” defect, but the same oxidation challenge occurs in other solder forms as well, such as ...
Tin-coated NanoFoil® is not one, but two very different products, combined. It is a heat source and a form of solder. In the world of interconnect...
InCuSil™ is a common term for an alloy of indium, copper, and silver which (depending on composition) has various melting points in the brazing ...
There are a lot of parameters to consider when choosing the right solder for your application: 1) The operational temperature of the final device p st...
Over the years, solder alloy choices have been pretty stable. In the last century, SN63 and SN62 could be found at any company making any k...
Since the NanoBond® process is almost instantaneous, fluxes are not used. (They just don’t have enough time to heat up to their activation t...