Halogen-Free Solder Paste - Part 3
It seems that the topic of Halogen-Free Solder Paste has grown by another leap and bound. The big confusion is what are the definitions of Halogen-Fre...
It seems that the topic of Halogen-Free Solder Paste has grown by another leap and bound. The big confusion is what are the definitions of Halogen-Fre...
In a perfect world, materials printed through a circular stencil aperture would be column-like with a flat top. When you look closely at a printed fl...
We are looking into a way to deposit solder on a typical die attach machine without using die-attach paste – and without a tooling change. This...
This question was posed to me while introducing a family member to the world of Engineered Solders this past weekend. While I was still reeling from t...
For the second half of Solder Paste Transfer Efficiency, I would like to talk about tolerances and the Rule of 10% Standard Deviation (σ). From ...
With the Strategies in Light show just behind us, I thought it a good time to discuss a little further the use of metal thermal interface materials......
Do you have a 2’ x 3’ area on the wall of your office or cubical for the latest new and improved Indium Corporation Wall Chart? a......
Okay, you’re at the final stage of Package-on-Package assembly. Simply heat per the reflow profile suggested by your solder manufacturer (hopefu...
A great Indium Knowledge Base question came from a customer last week for “recommendations on solder paste height versus component pitch…&...
Keep in mind that the stack of components that have just been assembled are vulnerable to misalignment and oxidation. We have done some work up-front ...
Stacking Package-on-Package components is one of the easiest parts of the assembly process. Although each Package-on-Package solder paste and Package-...
Before even thinking of dipping a component, you had better verify that your paste or flux is 1) the proper thickness and 2) uniform across the surfac...