How to Solder a Wire to a Pad
It seems like a fairly simple thing to do. What could be difficult about soldering a wire to a pad? Well, I hear three common complaints a...
It seems like a fairly simple thing to do. What could be difficult about soldering a wire to a pad? Well, I hear three common complaints a...
It is hard to believe, but 50 years ago, on October 9th, the first visible light LED was demonstrated by Nick Holonyak, Jr. of GE Advanced......
The Indium Corporation has developed a new solder research kit designed specifically to meet the needs of medical manufacturers who are soldering to N...
It won’t be long until we in the northern hemisphere are complaining about the snow and the cold, but right now, it is all about the heat! ...
Folks, In Ken Burn’s excellent miniseries The Civil War, Shelby Foote states that the Civil War made us a country by uniting No...
Maria Durham, Indium’s new Technical Specialist in Semiconductor and Advanced Assembly Materials, has been doing some research on indium lead (I...
Musings on Metals: Copper It could be argued that civilization began with the smelting of copper. Although thousands of years before, humans fir...
Reducing the surface oxides of Nitinol is just the first step in getting a good solder joint with this versatile medical assembly material. Next you h...
a href="http://blogs.indium.com/blog/eric-bastow" target="blank”>img alt="Soldering to Nitinol with Flux 2" src=&quo...
Folks, Let’s look in on Patty and her colleagues…... Sam Watkins, ACME New Hampshire site GM, had just finished meeting with his boss, A...
Folks, I thought I would post a few short thoughts as the new year begins. Here it goes: 1. A......