Jasbir Bath and the Solar Engineering and Manufacturing Association (SEMA)
I recently had a chance to catch up with a friend and colleague, Jasbir Bath. If you’ve spent time in the electronics assembly industry you have...
I recently had a chance to catch up with a friend and colleague, Jasbir Bath. If you’ve spent time in the electronics assembly industry you have...
Back in 2005 a customer left a question on our website and it was answered by one of my solder heroes. Here is the Q&A: Question:......
Folks, Let’s look in on Patty and her colleagues…... Sam Watkins, ACME New Hampshire site GM, had just finished meeting with his boss, A...
With regard to soldering or wetting (coating) with indium, we are often asked to comment on the oxide formation of indium and how to remove it.......
We are often asked if it is possible to solder to stainless steel and, if so, what is the best procedure. As you may already know, stainless stee...
We are frequently asked if it is possible to solder to aluminum. The answer is yes, if the following guidelines are followed: FLUXES: Becau...
Looking for tech papers that answer the most basic soldering questions? These rank among our most frequently downloaded: Five Solder Families and......
Folks, A reader writes: My company makes an electronic product that requires a 40 year shelf life. We assemble with tin-lead solder on FR-4 PWBs....
After the report by Isofoton regarding reliability testing of Bi-based alloys for tabbing ribbon, the world learned that Bi-based alloys could survive...
Here is a question that was posted and answered on our website back in 2006, I think it is still quite relevant: img align="right" alt="...
Folks, Let’s see how Patty is doing with the latest crisis…… Upon hearing Claire Perkins inform her that Rob was in the hospital, ...
Two categories of solder are available to choose from when the in-service environment for a device reaches above 125°C either in continuous operat...