Tech Seconds: Troubleshooting Voiding
In this installment of Tech Seconds, Phil outlines how to effectively troubleshoot voiding issues when a customer notices an increase in the amount of...
Videos
Tech Seconds: Voiding - Symptom or Defect?
How do you determine whether your voids are a symptom or a defect. Phil Zarrow gives his advice. ...
Tech Seconds: How to Interpret Ion Chromatography (IC) Results
What should you consider them you analyze ion chromatography results? ...
An Overview of Vacuum Reflow Soldering
Brook Sandy-Smith, Technical Support Engineer for PCB Assembly Materials, and Phil Zarrow, discuss approaches for reaching near zero voiding and how v...
Choosing Flux-Coated Solder Preforms
Kimberly Flanagan, Technical Support Engineer, and Phil Zarrow examine the benefits of flux-coated solder preforms, and how they can improve the manuf...
Benefits of Solder Fortification Preforms
Kimberly Flanagan, Technical Support Engineer, and Phil Zarrow discuss how Solder Fortification® Preforms can help reduce voiding and increase joi...
Innovations For the Factory Floor: Indium Trichloride Type H
Indium Corporation responds to an industry request and develops indium trichloride with a high enough density to allow it to fit into one bo...
Innovations for the Factory Floor: the Creation of EZ-Pour®
Learn how EZ-Pour® has changed and simplified the process for using gallium trichloride from a multi-step process to a simple glove box envir...
Introduction to the Solder Tube Product Line
What are solder tubes? They are solder washers that work like a finger trap to create an electrical connection within a plastic tube, while prote...
LEDs Everywhere: How Indium Factors into LED Manufacturing
Bill Jackson and Phil Zarrow discuss how the element indium factors into LED manufacturing....
PCIM 2018 Preview
Seth Homer, Product Manager Engineered Solders, talks Indium Corporation's InFORMS® and LV1000 flux coating, which are being featured at ...
Wave Flux and Reliability
Brook Sandy-Smith, Technical Support Engineer for PCB Assembly Materials, and Phil Zarrow discuss the use of pallets when wave soldering and its impac...