Indium Corporation Technology Experts to Present at SMTA South East Asia Technical Conference on Electronics Assembly
April 4, 2012
Indium Corporation's Vice President of Technology Dr. Ning-Cheng Lee and Product Manager of PCB Assembly Materials Tim Jensen will present their technical findings at the SMTA South East Asia Technical Conference on Electronics Assembly, April 18-20, 2012 in Penang, Malaysia.
Dr. Lee will instruct two courses. The first, Reliability of Lead-Free Solder Joints, will discuss the best options to achieve reliable lead-free solder joints under various applications. Topics include the failure modes, thermal cycling reliability, and fragility of solder joints as a function of material combination, thermal history, and stress history. A special emphasis will be placed on the understanding of how the various factors contribute to reliability.
Dr. Lee's second course, Electromigration – The Hurdle For Miniaturization and High Power Devices, explores the electromigration phenomenon in detail and how to prevent electromigration within products. Topics covered include all critical aspects of electromigration of solder joints, including failure mechanism, effect of solder alloy composition, solder joint metallurgy and configuration, pad design, pad composition, current density, temperature, and current polarity. In addition, Dr. Lee will recommend how to achieve long life under high-current stressed conditions for solder joints and redistribution layer through optimized designs.
Tim's presentation of Alternative Alloys to SAC305 for Lead-Free Assembly will provide a current overview of the state of lead-free alloys from a cost, application, and reliability perspective.
Tim will also present Material and Process Optimization for Head-in-Pillow Optimization, which outlines the causes of head-in-pillow (HIP) and the best practices to reduce such defects.
Dr. Lee is a world-renown soldering expert and an SMTA Member of Distinction. He has extensive experience in the development of high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. His current research interests cover advanced materials for interconnects and packaging for electronics and optoelectronics applications, with emphasis on both high performance and low cost of ownership.
As a product manager, Tim works with customers to troubleshoot and optimize SMT process lines. He specializes in SnPb and Pb-free solder paste, halogen-free soldering materials, wave solder fluxes, bar solder, rework fluxes, and flux-cored wire.
Tim is an SMTA-certified process engineer and has earned his bachelor's degree in chemical engineering from Clarkson University. He readily shares his expertise by authoring technical papers, writing for technical publications, and participates actively in several IPC standards development committees. Tim also authors a blog, which can be found at blogs.indium.com/blog/tim-jensen.
For more information or to register, visit www.smta.org.
Indium Corporation is a premier materials supplier to the global electronics, semiconductor, solar, thin-film and thermal management markets. Products include solders, preforms, and fluxes; brazes; sputter targets; indium, gallium, and germanium metals and compounds; and Reactive NanoFoil®. Founded in 1934, Indium Corporation has global technical support and factories located in China, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit www.indium.com or email abrown@indium.com.