circuit board

Seth Homer

Seth Homer

Product Manager Engineered Solders

Indium Corporation
Phone: +1 (315) 853-4900
E-mail: shomer@indium.com
Address: 34 Robinson Rd., Clinton, NY USA 13323

Blog

Seth Homer's Blog

Biography

Watch Seth's From One Engineer to Another Video

Seth is a Product Manager for Indium Corporation’s Engineered Solder Materials. He has worked with Indium Corporation for over 20 years, serving in both manufacturing operations and marketing roles. While in operations, Seth was responsible for many of the products within the engineered solders product offering. In 2006, he transitioned to a marketing role as a liaison between customer support teams, globally. Over the years, Seth has been responsible for:

  • Thermal Interface Materials
  • Au and Au-containing alloys
  • Flux-coated preforms
  • Solder ribbon  and wire
  • NanoFoil®
  • InFORMS®

Seth has also provided marketing support for specific industries, such as RF infrastructure and was heavily involved in the development of Indium’s LV1000 flux coating, which was designed specifically for that industry.

Currently, Seth is working with the IGBT and power electronics industries, gaining insight by travelling to customer sites globally and working closely with manufacturing internally as he helps support current production demand and future product development. 

Seth Homer's Blog Posts

PCIM 2018 Preview

24 May 2018 by Seth Homer [view bio]

Seth Homer, Product Manager Engineered Solders, talks Indium Corporation's InFORMS® and LV1000 flux coating, which are being featured at PCIM 2018 in Nuremberg, Germany in June 2018.

Read More

Solder Redefined Part 4 – Baseplate to Heat-Sink

07 Jun 2017 by Seth Homer [view bio]

At Indium Corporation, we're redefining how we use solder at the die-attach, DBC to baseplate, and baseplate to heat-sink levels so we can achieve a more reliable IGBT that can perform at increasingly higher standards. If you missed the first three videos in this series, get caught up at indium.com/IGBT.

Read More

Solder Redefined Part 3 – DBC Substrate to Baseplate

06 Jun 2017 by Seth Homer [view bio]

As we've discussed, there are three attach levels of peak concern in the IGBT stack up. At Indium Corporation, we're redefining how we use solder at the die-attach, substrate, and baseplate to heat-sink levels, so we can achieve a more reliable IGBT that can perform increasingly higher standards. If you missed the first two videos in this series, be sure to check them out at www.indium.com/IGBT.

Read More

View All Blog Posts

Other Ways to Contact Indium

Indium Corporation has manufacturing capabilities, technical support, sales offices, and representatives world-wide who are committed to providing the very best support. Please select your region for customer support information.

From One Engineer to Another®

All of Indium Corporation’s products and solutions are designed to be commercially available
unless specifically stated otherwise.

Indium Corporation uses cookies to provide you with the best possible experience on our website. By using our website, you agree to the placement of cookies on your device.
Read more about our use of cookies here.