Controlling Junction Temperature of LEDs with Thermal Management Materials
The junction temperature in an LED (the p-n junction temperature) is most critical to consider for LED cooling. If this temperature rises above t...
The junction temperature in an LED (the p-n junction temperature) is most critical to consider for LED cooling. If this temperature rises above t...
Under-the-Hood: The “Death Valley” of Power Electronics New insights in April into changes in the European ELV (End-of-life vehi...
The question often arises as to whether or not a water wash solder paste should be halogen-free. Since halogen-free is fundimentally an environm...
In addition to Au/Sn sputtering pucks, Indium Corporation can also manufacture full size Au/Sn sputtering targets. 80Au/20Sn is......
Figure 1: Solderspatter (soldersplash) on Gold/Nickel Figure 2: Phase Inversion during Reflow ......
Solder Die Attach Image Courtesy of memsonics.com The clock is ticking before the extension of Pb-free legislation for high Pb-containi...
Folks I was chatting recently with Indium Corporation’s Mike Fenner about Sn/Cu alloys for solder paste. Mike has many years of experience ...
The Insulated Gate Bipolar Transistor (IGBT) module is rapidly taking over from MOSFET technology as the solid-state power switch of choice. Die-attac...
A few of Indium’s solder experts ready to assist. I am well aware that many of you are now working in stressed out, short-handed workplaces and ...
Indium Corporation is a big proponant of using the EN14582 oxygen bomb test method for halogen determination. However, we have seen misleading r...