An Interview with The Professor
Folks, Recently, I ran into The Professor. He graciously agreed to an interview. The following is the discussion from our meeting....
Folks, Recently, I ran into The Professor. He graciously agreed to an interview. The following is the discussion from our meeting....
I polled some of our field sales force to find out what common questions customers ask them. You (the reader) probably have similar questions.&n...
Ignoring the solder selection as part of your design process is risky business. font face="Times......
In a recent blog entry titled RoHS: 3 Years Later, Dr. Lasky comments on the overall success of the RoHS legislation. Before imp...
These pictures were sent to me by my friend Drew Jones, after he was done skydiving last week (...
Solder Basics… If I needed to pick my favorite flux for hand soldering, it would easily be PoP Flux 030B. I know it’s probably...
After you’ve reflowed solder in contact with a flux, you’re always left with a certain amount of flux residue. There are no clear industry...
A reader of this blog recently mentioned: “I am interested in what products could be sold by manufacturer’s......
From an upcoming SMTAI presentation dealing with PoP solder paste: “...Formulation, particle size,......
So, what do you think about this micro robot? (You can read the full story here.) It......
Got contacted last week by Tony Hilvers of the IPC (Association Connecting Electronics Industries). Tony tells me that the Canadian Government is...