Indium Calculation Tools for the Engineer
Simple Steps to Process Optimization
Take the guesswork out of process optimization with Indium Corporation’s analytical tools. Our portfolio of process optimizations calculators and guides are designed to give you actionable data to improve your processes.
The Solder Alloy Selector Guide allows you to identify the best alloy for your processes based on your requirements for melting temperature, operational temperature, or process temperature. You can also narrow your search to include only Pb-free and Cd-free and RoHS compliant alloys.
Over time, the formation of dross can reduce the percentage of tin in your solder pot. The Solder Pot Calculator is a quick and easy tool that you can use to rebalance your pot back into spec by telling you the amount and type of metal to add to your solder pot. The calculator can also be used when you want to remove solder alloy from the pot and replace it with fresh metal when the pot is full.
The cored wire calculator contains two versatile tools. One tool allows you to determine the flux volume % and wire wall thickness based on the specific gravity, flux weight percent, and wire diameter of an alloy. The second tool calculates the length of solder wire when given the specific gravity, flux weight percent, wire diameter, and total weight of the alloy.
Process Optimization Calculators
ReflowCoach™ is a software tool for optimizing the reflow process. It combines your reflow furnace's capabilities with your solder materials' recommended procedures to deliver an optimized reflow profile for the assembly you are making.
- Standard Apertures
- Passive Apertures
- Pin-in-Paste Apertures
- Preforms and Pin-in-Paste
WaveCoach™ is a software tool for optimizing the wave soldering process. It assists in the development and creation of the pre-heat profile and wave soldering machine parameters desired to each specific assembly.
AuditCoach™ helps SMT process engineers and managers to assess the fitness of their assembly process to produce quality world-class products at the lowest possible cost.
LineCoach™ performs the calculations needed to determine which components should be placed by various component placement machines to assure maximum productivity.
DefectRate Calculator determines the number of samples with no failures that are needed to support a given defect rate. If the number of samples is given, then the defect rate that can be supported if no samples fail is calculated.
The alloy density will calculate the density of a solder given the constituent metal weight percentages.
From One Engineer to Another®
All of Indium Corporation’s products and solutions are designed to be commercially available
unless specifically stated otherwise.