Indium Corporation sells compounds based on the elements indium, germanium, gallium, and tin. These compounds are used in the manufacturing process of a number of high-tech devices, as these elements serve as crucial building blocks in semiconductor chips, electronic components, batteries, and other complex electronic products.
The compounds we make are inorganic compounds with challenging specifications. You can download the spec sheets from the area below - these are a great starting point to learn about our various materials. It is important to note, however, that your application determines what is the best specification. A compound like gallium oxide, for example, has five different crystal forms, only one of which might be suitable for your specific application. In addition, choosing the right starter material for our process will affect the amount of trace impurities. This may affect your process, as it might be sensitive towards some specific impurities. If you are developing or designing a process with one of our compounds in mind and want to find the best solution, please contact us. Our staff of dedicated engineers is always available to answer any questions you may have.
We manufacture our materials from small to large scale in our facilities in Utica and Rome, NY – all processing takes place in the USA.
The pictures below show some of the inorganic materials we make. Move your mouse over the picture to see SEM images taken from the same materials.
Related Markets and Applications
Inorganic Compounds Technical Documents
No application notes to display
Product Data Sheets
No product data sheets to display
Safety Data Sheets
No safety data sheets to display
Indium Corporation Blog Posts
As more and more of the electronics industry moves toward (SMA) Subaquatic Microelectronics Assembly, questions have arisen regarding safety aspects, solder joint quality, and reflow profiling. We believe all 3 of these concerns can be resolved by using NanoFoil®. Happy April fool’s…
Today’s technology simplifies the translation of an idea into a design. A drawing can be dimensioned in an instant. Thermal models and strength of materials calculations predict the reliability of a solder joint before a single part is made. However, before we get to that point we must…
No matter how accurate the spray fluxer is there will at least be some flux that is not deposited on the board that needs to be removed from the system. I mentioned in my previous post that all spray fluxer setups need to have their own venting system, separate from the soldering station vent system. The…
Indium Corporation does not recommend, manufacture, market, or endorse any of our products for human consumption.
Product Manager of Compounds
From One Engineer to Another®
All of Indium Corporation’s products and solutions are designed to be commercially available
unless specifically stated otherwise.