Indium Corporation’s Jonas Sjoberg, Associate Director for Global Technical Service & Application Engineering, will host an InSIDER Series webinar regarding the implementation of high-density assemblies in electronic products on Tuesday, October 13 at 8 a.m. New York Time (1 p.m. British Time/8 p.m. Malaysia Time).
During DFx on High-Density Assemblies, Sjoberg will discuss the necessary factors to consider before starting any development work or implementing a new technology. It is critical to understand the product and industry requirements and capabilities—if this is not fully understood, failure is the most probable outcome. The assembly line for many end products will look very similar, but specification limits are different. Further, when it comes to materials selection—and solder paste in particular—the type of end product plays a big role. Even with the right solder paste, a good assembly process and a quality PCB can still result in component failure, leading to yield loss and increased cost. Sjoberg will address selecting the correct solder paste based on the end product and the need for doing proper root cause analysis before making any material or process changes.
Indium Corporation’s InSIDER Series is a free program designed to deliver expert technical content, share industry knowledge, and promote professional growth using a virtual platform. Current and future webinars can be found at www.indium.com/webinar.
Sjoberg is based in Kuala Lumpur, Malaysia, where he provides technical support to key regional and global customers. He has more than 25 years of technical experience in the electronics industry, including developing and deploying leading-edge designs and processes for packaging and assembly; managing research and development projects and facilities; and serving as technical advisor to internal and external design, development, and manufacturing sites worldwide. Sjoberg has presented and published numerous papers at industry leading electronic conferences/magazines and is an appointed distinguished speaker at SMTAI.
To register for Sjoberg’s webinar, visit www.indium.com/webinar. The webinar link will be shared with registrants the day of the event. Registrants must use a company email account to avoid Indium Corporation’s spam filters. This is a first-come, first-served event.
Indium Corporation là một nhà tinh chế, nhà luyện kim, nhà sản xuất và nhà cung cấp vật liệu hàng đầu cho các thị trường điện tử, bán dẫn, màng mỏng và quản lý nhiệt toàn cầu. Các sản phẩm bao gồm chất hàn và chất trợ dung; hàn đồng; vật liệu giao diện nhiệt; mục tiêu phun; kim loại indium, gali, germani và thiếc và các hợp chất vô cơ; và NanoFoil®. Được thành lập vào năm 1934, công ty có hỗ trợ kỹ thuật toàn cầu và các nhà máy đặt tại Trung Quốc, Ấn Độ, Malaysia, Singapore, Hàn Quốc, Vương quốc Anh và Hoa Kỳ.
Để biết thêm thông tin về Indium Corporation, hãy truy cập www.indium.com hoặc gửi email đến [email protected] . Bạn cũng có thể theo dõi các chuyên gia của chúng tôi, From One Engineer To Another® (#FOETA), tại www.facebook.com/indium hoặc @IndiumCorp .
