Indium Corporation will feature its reinforced solder alloy fabrications, InFORMS®, at PCIM Europe 2017, May 16-18, in Nuremberg, Germany.
Indium Corporation is redefining solder with its InFORMS solder preforms. InFORMS are a composite preform consisting of solder and a reinforcing matrix that, together, increase lateral strength and bondline co-planarity while improving thermal cycling reliability.
When InFORMS were used to solder a DBC to the baseplate of an IGBT, one study showed:
- Độ tin cậy của chu trình nhiệt được cải thiện gấp 4 lần so với phương pháp chỉ sử dụng phôi hàn
- Độ tin cậy của chu trình nhiệt được cải thiện gấp 2 lần so với phương pháp hàn phôi + khâu liên kết bằng dây nhôm
- Reduced voiding (<1%)
- Lower cost of ownership – as a drop-in replacement for a standard preform or solder paste, InFORMS require no additional process steps or equipment
For more information about InFORMS, visit www.indium.com/informs or see Indium Corporation at booth 7-315.
Để biết thêm thông tin về Indium Corporation, hãy truy cập www.indium.com hoặc gửi email đến [email protected] . Bạn cũng có thể theo dõi các chuyên gia của chúng tôi, From One Engineer To Another ® (#FOETA), tại www.facebook.com/indium hoặc @IndiumCorp .
