Indium Corporation's Dr. Ron Lasky, Senior Technologist, discusses the importance of indium tin oxide (ITO) in touchscreen and flat panel technology in a new video available at www.indium.com/blog/phil-zarrow.
As part of the Electronics Assembly with Phil Zarrow series, Lasky and SMT manufacturing expert Phil Zarrow, President and Principal Consultant for ITM Consulting, review how ITO is used to enable flat panel and touchscreen technologies.
"Indium metal and ITO are among the most important materials in the modern world," according to Lasky. "The very nature of metals is that they're opaque; it's a matter of physics. So, scientists had to find a material that both conducts electricity and is transparent – and ITO is the solution. ITO's transparency enables flat panel displays and touchscreen technology."
For more information on indium, high purity indium, and indium alloys, visit www.indium.com/metals/indium.
Dr. Lasky, holder of the prestigious SMTA Founder's Award, is a world-renowned process expert and a Senior Technologist at Indium Corporation. He is also a Professor of Engineering and the Director of the Cook Engineering Design Center at Dartmouth College. He has more than 30 years of experience in electronics and optoelectronic packaging and assembly. Dr. Lasky has authored six books, and contributed to nine more on science, electronics, and optoelectronics. Additionally, he has served as an adjunct professor at several colleges, teaching more than 20 different courses on topics ranging from electronics packaging, materials science, physics, mechanical engineering and science, and religion. Dr. Lasky holds numerous patent disclosures and is the developer of several SMT processing software products relating to cost estimating, line balancing, and process optimization. He is the co-creator of engineering certification exams that set standards in the electronics assembly industry, worldwide. Dr. Lasky also authors a technology blog, which can be found at www.indium.com/drlasky.
Zarrow đã tham gia vào quá trình chế tạo và lắp ráp PCB trong hơn 35 năm. Ngoài kinh nghiệm trong lĩnh vực lắp ráp và vệ sinh tự động, Zarrow còn được công nhận về chuyên môn trong công nghệ hàn chảy bề mặt, thiết kế và triển khai thiết bị lắp SMT và hệ thống hàn chảy. Kinh nghiệm thực tế sâu rộng của ông cũng bao gồm thiết lập và xử lý sự cố xuyên lỗ và quy trình SMT trên toàn thế giới.
Indium Corporation là nhà sản xuất và cung cấp vật liệu hàng đầu cho các thị trường điện tử, bán dẫn, màng mỏng, quản lý nhiệt và năng lượng mặt trời toàn cầu. Các sản phẩm bao gồm chất hàn và chất trợ dung; hàn đồng; vật liệu giao diện nhiệt; mục tiêu phun; kim loại indium, gali, germani và thiếc và các hợp chất vô cơ; và NanoFoil ® . Được thành lập vào năm 1934, Indium có hỗ trợ kỹ thuật toàn cầu và các nhà máy đặt tại Trung Quốc, Malaysia, Singapore, Hàn Quốc, Vương quốc Anh và Hoa Kỳ.
Để biết thêm thông tin về Indium Corporation, hãy truy cập www.indium.com hoặc gửi email đến [email protected] . Bạn cũng có thể theo dõi các chuyên gia của chúng tôi, From One Engineer To Another ® (#FOETA), tại www.facebook.com/indium hoặc @IndiumCorp .
