Indium Corporation’s Indium8.9HFA Solder Paste is a versatile, halogen-free, Pb-free, solder paste with leading print performance on miniaturized components. Assemblers and OEMs are adopting this remarkable new product at an accelerating pace.
Print performance is especially critical for manufacturers of mobile phones and other personal electronics devices as they struggle to contend with sub-8 mil challenges associated with continuing miniaturization in the electronics assembly industry.
Indium8.9HFA Solder Paste provides:
- Low Cost of Ownership & High Print Yields
- Unsurpassed transfer efficiency for consistent, full volume print deposits (8 mil) results in reduced frequency of insufficients and high first-pass print yields
- Low print pressure and excellent response-to-pause saves time and money on stencils and line changes
- Solvent-free dry-wiping reduces costs
- Increased throughput
- Higher print speed and reduced wipe frequency enables short cycle time, high up-time, and high throughput printing
"Indium8.9HFA represents the culmination of years of research into optimizing rheological properties to obtain the industry’s best printing solder paste.” Dr. Ning-Cheng Lee, Vice President of Technology for Indium Corporation’s Research and Development
“The fast ramp of Indium8.9HFA with personal electronics manufacturers is driven by the product’s ability to enable high print yields. Customers really value its high throughput performance. We have not seen adoption rates this fast since the introduction of NC-SMQ92J in 1999.” Tim Jensen, Product Manager for Indium Corporation’s PCB Assembly Materials
Indium8.9HFA Solder Paste is part of Indium Corporation’s Indium8.9 series of solder pastes. The series was designed to provide multi-faceted performance characteristics, bringing the right balance of solder paste attributes tailored specifically to your manufacturing process. Each paste in the series was developed to optimize print performance and mitigate common defects faced by manufacturers of personal electronics, such as QFN voiding, head-in-pillow, and graping.
For more information about Indium8.9HFA or the Indium8.9 series of solder pastes, visit www.indium.com/indium8.9series or email [email protected].
Indium Corporation là nhà sản xuất và cung cấp vật liệu hàng đầu cho các thị trường điện tử, bán dẫn, năng lượng mặt trời, màng mỏng và quản lý nhiệt toàn cầu. Các sản phẩm bao gồm chất hàn, phôi và chất trợ dung; hàn đồng; mục tiêu phun; kim loại indium, gali và germani và các hợp chất vô cơ; và NanoFoil®. Được thành lập vào năm 1934, Indium có hỗ trợ kỹ thuật toàn cầu và các nhà máy đặt tại Trung Quốc, Singapore, Hàn Quốc, Vương quốc Anh và Hoa Kỳ.
Để biết thêm thông tin về Indium Corporation, hãy truy cập www.indium.com hoặc gửi email đến [email protected] .
