Several of Indium Corporation’s technical experts will share their expertise at the IPC APEX Expo technical conference on February 27-March 1 in San Diego, Calif.
Vice President of Technology Dr. Ning-Cheng Lee will lead two presentations during sessions on Alloy Reliability I (S15) and Alloy Reliability II (S23):
- Sn3.2/Ag0.7/Cu5.5/Sb Solder Alloy With High-Reliability Performance Up to 175°C
- Low-Temperature Solder Alloys With High-Reliability Performance
Additionally, Eric Bastow, Assistant Technical Manager, America’s Region, and Robert McKerrow, Product Specialist – Engineered Solders will present on:
- The Effect of a Nitrogen Reflow Environment on the Electrical Reliability of Rosin-Based No-Clean Solder Paste Flux Residue, during a session on Surface Insulation Resistance (S10); and
- Solder Fortification® and Flux-Coated Preforms during the poster presentation sessions on Wednesday, Feb. 28.
For more information on the technical and poster sessions offered at IPC APEX, visit www.ipcapexexpo.org.
Indium Corporation là nhà sản xuất và cung cấp vật liệu hàng đầu cho các thị trường điện tử, bán dẫn, màng mỏng và quản lý nhiệt toàn cầu. Các sản phẩm bao gồm chất hàn và chất trợ dung; hàn đồng; vật liệu giao diện nhiệt; mục tiêu phun; kim loại indium, gali, germani và thiếc và các hợp chất vô cơ; và NanoFoil ® . Được thành lập vào năm 1934, công ty có hỗ trợ kỹ thuật toàn cầu và các nhà máy đặt tại Trung Quốc, Malaysia, Singapore, Hàn Quốc, Vương quốc Anh và Hoa Kỳ.
For more information about Indium Corporation, visit indiumstg.wpenginepowered.com or email [email protected]. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.
