Connector and Cable Assembly

Interconnect reliability is critical to the reliability of semiconductor packaging and electronic systems. If we look at the life cycle from the chip to the system—from IC design, wafer fab,

As a technical support engineer,I get this question quite often. A solder preform is a solid, flat, manufactured-shape of solder that can be used for a wide variety of assembly applications. Solder

In past blog posts, I have talked about multiple applications for Indium Corporation’s Solder Fortification®Preforms where stronger solder joints are needed including edge connectors,

Robert McKerrow, Product Specialist-Engineered Solders, and Phil Zarrow discuss Indium Corporation’s line of solder

To easily describe one of the applications of Indium Corporation’s Solder Tubes, one need look no further than the classical practical joker’s ‘Finger Trap’.The joke is that

Mobile phones.Tablets. Laptops. There is a good chance that you have one of these (how else could you be reading this?) and still a good chance you have at least two of

Flux-coated solder preforms allow you to reduce the amount of flux that’s presented to the joint and increase the solder volume. SMT expert Phil Zarrow interviews Seth Homer to explain the

Phil Zarrow: Derrick, solder preforms. What are they? Derrick Herron: Well, a solder preform is a defined shape and size of a solder alloy. It can be used in place or in conjunction with a solder

The Indium Corporation recently had a customer contact us looking for 50In50Pb solder wire. We manufacture large amounts of this indium-lead material as it is used in numerous applications. In this