Năm chuyên gia công nghệ của Indium Corporation sẽ trình bày các kết quả nghiên cứu kỹ thuật của mình tại hội chợ APEX ở Las Vegas, Nevada, từ ngày 6 đến ngày 9 tháng 4 năm 2010.
- Ning-Cheng Lee, Tiến sĩ, Phó chủ tịch Công nghệ
- Ronald C. Lasky, Tiến sĩ, Chuyên gia công nghệ cao cấp
- Mario Scalzo, Kỹ sư Hỗ trợ Kỹ thuật Cấp cao
- Eric Bastow, Kỹ sư hỗ trợ kỹ thuật cao cấp
- Chris Anglin, Kỹ sư phát triển ứng dụng
Tiến sĩ Lee sẽ trình bày ba bài báo; “Công nghệ chất hàn không chì và ảnh hưởng đến quá trình làm sạch”. Việc sử dụng chất hàn không chì, áp lực về chi phí và câu hỏi muôn thuở “sạch đến mức nào mới được coi là sạch?” đang đặt ra những thách thức liên tục cho các quy trình lắp ráp. Bài báo này đề cập đến những thách thức đó.
Thứ Ba, ngày 6 tháng 4 – 1:30 – 3:00 chiều
Lựa chọn chất hàn nhúng và bột hàn cho quy trình lắp ráp PoP. Bài báo này phân tích triển vọng thị trường, các phương pháp quy trình lắp ráp và các yếu tố cơ sở hạ tầng chính đã được phát triển nhằm tạo điều kiện tích hợp các thế hệ mới của các thành phần chip logic rời rạc và bộ nhớ hiệu suất cao vào cùng một khung gói.
Thứ Tư, ngày 7 tháng 4 – 10:15 – 11:45 sáng
Đạt được các mối hàn SAC không chì có độ tin cậy cao và chi phí thấp thông qua việc pha tạp Mn hoặc Ce. Trong nghiên cứu này, các hợp kim SAC có hàm lượng Ag thấp được pha tạp Mn hoặc Ce đã được đánh giá so với hợp kim eutectic SnPb, SAC105 và SAC305 thông qua các thử nghiệm rơi theo tiêu chuẩn JEDEC, thử nghiệm uốn động, thử nghiệm chu kỳ nhiệt và thử nghiệm uốn tuần hoàn.
Thứ Tư, ngày 7 tháng 4 – 1:30 – 3:30 chiều
Ông cũng sẽ trình bày một khóa đào tạo chuyên môn có chủ đề “Đạt được độ tin cậy cao cho các mối hàn không chì – Các yếu tố liên quan đến vật liệu ”. Khóa học này đề cập đến cách các yếu tố khác nhau góp phần gây ra các hình thức hỏng hóc, cũng như cách lựa chọn hợp kim hàn và lớp hoàn thiện bề mặt phù hợp để đạt được độ tin cậy cao.
Thứ Sáu, ngày 9 tháng 4 – 9:00 sáng – 12:00 trưa
Dr. Lasky will be presenting a professional development course
Lead-Free Reliability
This course will cover how to develop a strategy for compliant electronic assembly with high yields and excellent reliability while complying with global environmental regulations.
· Thursday, April 8 – 9:00am – 12:00pm
Mario Scalzo; will be presenting the paper
Addressing the Challenge of Head-in-Pillow Defects in Electronics Assembly. This paper discusses the head-in-pillow failure mode and a strategy to minimize this troublesome defect.
· Wednesday, April 7 – 9:00 – 10:00am
He will also be presenting a paper authored by Tim Jensen
Challenges for Implementing a Halogen-Free Process.; Replacing halogenated compounds can have a dramatic affect on the PCB assembly process. This paper discusses those challenges, as well as techniques and practices that help ensure high end-of-line yields and continued reliability.
· Thursday, April 8 – 10:15 – 11:45am
Eric Bastow will be presenting
Understanding SIR. This paper will discuss the issue of SIR coupon preparation, board cleaning techniques, and how board cleanliness directly affects SIR results.
· Wednesday, April 7 – 10:15 – 11:45am
Chris Anglin will be presenting the paper
Stencil Printing Transfer Efficiency of Circular vs. Square Apertures with the Same Solder Paste Volume. This paper addresses the issues associated with stencil and squeegee design and the printing of paste for small passives.
· Thursday, April 8 – 10:15 – 11:45am
Indium Corporation is also exhibiting at booth #441.
Sponsored by IPC, this technical conference is known worldwide as one of the finest and most selective in the world.
Dr. Lee is a world-renown soldering expert and an SMTA Member of Distinction. He has extensive experience in the development of solder pastes, fluxes, high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. His current research interests cover advanced materials for interconnects and packaging for electronics and optoelectronics applications, with emphasis on both high-performance and low-cost of ownership. Dr. Lee is also a member of the SMTAI planning committee.
Dr. Lasky, holder of the prestigious SMTA Founder’s Award, is a world-renown process expert and an Instructional Professor at Dartmouth College. He has over 25 years of experience in electronics and optoelectronic packaging and assembly. He has authored or edited five books and numerous technical papers and holds several patent disclosures. Dr. Lasky also authors a technology blog which can be found at http://blogs.indium.com/blog/an-interview-with-the-professor.
Tim Jensen is the Product Manager for PCB Assembly Materials in Indium Corporation’s Solder Products Business Unit. He is an SMTA-Certified SMT Process Engineer. He has spent over a decade troubleshooting and optimizing SMT process lines. He works closely with Indium’s Technical Service, Research & Development, and Sales Teams to ensure that Indium continues to offer cutting edge products to meet unique challenges in the electronics assembly industry. Tim has a bachelor’s degree in Chemical Engineering from Clarkson University. He has authored several technical publications and numerous process and technical guidelines. Tim is a member of the SMTA and participates actively in several IPC standards development committees.
Eric Bastow joined Indium Corporation in 2001 developing new solder paste flux chemistries under the direction of Dr. Ning-Cheng Lee. He also gained experience performing residual gas analysis of hermetic electronic packages and developing electroless nickel-plating bath chemistries. Eric is an SMTA-certified process engineer (CSMTPE) and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College. He has an associate’s degree in Engineering Science from the State University of New York and has authored several technical papers and articles.
Mario Scalzo joined Indium Corporation in 2000. He holds a bachelor’s degree in Chemistry from Saint Anselm College. He also holds a certificate from the American Chemical Society for Professional Education. In addition, he is an SMTA-Certified Process Engineer and has a Six-Sigma Black Belt from Dartmouth College’s Thayer School of Engineering. He is also the author of the Electronics Assembly Materials blog http://blogs.indium.com/blog/mario-scalzos-tech-support-blog.
Chris Anglin has over 15 years of experience in advanced process development, new product introduction, and electronics assembly manufacturing. He has a master’s degree in Industrial Engineering from the State University of New York at Binghamton. He is trained in Six Sigma Black Belt programs and is also an SMTA-Certified Process engineer.
For more information about the technical conferences and APEX, visit http://www.goipcshows.org.
Indium Corporation is a premiere materials supplier to the global electronics, semiconductor, solar, thin film and thermal management markets. Products include solders, preforms, and fluxes; brazes; sputter targets; indium, gallium, and germanium chemicals and sourcing; and Reactive NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit https://www.indium.com or email [email protected].
