跳至內容

Indium Corporation 技術專家將於 APEX 大會上發表演講

Indium Corporation 的五位技術專家將於 2010 年 4 月 6 日至 9 日,在內華達州拉斯維加斯舉行的 APEX 展會上發表其技術研究成果。

  • 李寧成博士,技術副總裁
  • Ronald C. Lasky,PE 博士,高級技術師
  • 馬里奧·斯卡爾佐,資深技術支援工程師
  • Eric Bastow,資深技術支援工程師
  • Chris Anglin,應用開發工程師

李博士將發表三篇論文,其中一篇題為《無鉛助焊劑技術及其對清洗的影響》。無鉛化、成本壓力,以及那永無止境的「究竟多乾淨才算乾淨?」這個問題,都為組裝作業帶來了持續的挑戰。本論文將探討這些挑戰。

4月6日(星期二)—— 下午1:30 – 3:00

PoP 組裝用浸鍍助焊劑與焊錫膏的選型。本文探討市場展望、組裝製程方法,以及為實現將新一代高效能分立邏輯與記憶體晶粒元件整合至單一封裝輪廓而發展出的關鍵基礎設施要素。

4月7日(星期三)—— 上午10:15 – 11:45

透過錳(Mn)或鈈(Ce)摻雜,實現高可靠性、低成本的無鉛 SAC 焊點。本研究針對摻有錳(Mn)或鈈(Ce)的低銀(Ag)SAC 合金,與共晶 SnPb、SAC105 及 SAC305 進行比較評估,測試項目包括 JEDEC 跌落測試、動態彎曲測試、溫度循環測試及循環彎曲測試。

4月7日(星期三)—— 下午1:30 至 3:30

他還將主講一門專業進修課程,題為《實現無鉛焊點的高可靠性——材料考量》。本課程探討多種因素如何導致失效模式,以及如何選用適當的焊料合金與表面處理方式以達成高可靠性。

4月9日(星期五)—— 上午9:00 – 中午12:00

Dr. Lasky will be presenting a professional development course
Lead-Free Reliability
This course will cover how to develop a strategy for compliant electronic assembly with high yields and excellent reliability while complying with global environmental regulations.
·     Thursday, April 8 – 9:00am – 12:00pm
Mario Scalzo; will be presenting the paper
Addressing the Challenge of Head-in-Pillow Defects in Electronics Assembly. This paper discusses the head-in-pillow failure mode and a strategy to minimize this troublesome defect.
·     Wednesday, April 7 – 9:00 – 10:00am 
He will also be presenting a paper authored by Tim Jensen
Challenges for Implementing a Halogen-Free Process.; Replacing halogenated compounds can have a dramatic affect on the PCB assembly process. This paper discusses those challenges, as well as techniques and practices that help ensure high end-of-line yields and continued reliability.
·     Thursday, April 8 – 10:15 – 11:45am
Eric Bastow will be presenting
Understanding SIR. This paper will discuss the issue of SIR coupon preparation, board cleaning techniques, and how board cleanliness directly affects SIR results.
·     Wednesday, April 7 – 10:15 – 11:45am
Chris Anglin will be presenting the paper
Stencil Printing Transfer Efficiency of Circular vs. Square Apertures with the Same Solder Paste Volume. This paper addresses the issues associated with stencil and squeegee design and the printing of paste for small passives.
·     Thursday, April 8 – 10:15 – 11:45am
Indium Corporation is also exhibiting at booth #441.
Sponsored by IPC, this technical conference is known worldwide as one of the finest and most selective in the world.   
Dr. Lee is a world-renown soldering expert and an SMTA Member of Distinction. He has extensive experience in the development of solder pastes, fluxes, high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. His current research interests cover advanced materials for interconnects and packaging for electronics and optoelectronics applications, with emphasis on both high-performance and low-cost of ownership. Dr. Lee is also a member of the SMTAI planning committee.
Dr. Lasky, holder of the prestigious SMTA Founder’s Award, is a world-renown process expert and an Instructional Professor at Dartmouth College. He has over 25 years of experience in electronics and optoelectronic packaging and assembly. He has authored or edited five books and numerous technical papers and holds several patent disclosures. Dr. Lasky also authors a technology blog which can be found at http://blogs.indium.com/blog/an-interview-with-the-professor.
Tim Jensen is the Product Manager for PCB Assembly Materials in Indium Corporation’s Solder Products Business Unit. He is an SMTA-Certified SMT Process Engineer. He has spent over a decade troubleshooting and optimizing SMT process lines. He works closely with Indium’s Technical Service, Research & Development, and Sales Teams to ensure that Indium continues to offer cutting edge products to meet unique challenges in the electronics assembly industry. Tim has a bachelor’s degree in Chemical Engineering from Clarkson University. He has authored several technical publications and numerous process and technical guidelines. Tim is a member of the SMTA and participates actively in several IPC standards development committees.
Eric Bastow joined Indium Corporation in 2001 developing new solder paste flux chemistries under the direction of Dr. Ning-Cheng Lee. He also gained experience performing residual gas analysis of hermetic electronic packages and developing electroless nickel-plating bath chemistries. Eric is an SMTA-certified process engineer (CSMTPE) and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College. He has an associate’s degree in Engineering Science from the State University of New York and has authored several technical papers and articles.
Mario Scalzo joined Indium Corporation in 2000. He holds a bachelor’s degree in Chemistry from Saint Anselm College. He also holds a certificate from the American Chemical Society for Professional Education. In addition, he is an SMTA-Certified Process Engineer and has a Six-Sigma Black Belt from Dartmouth College’s Thayer School of Engineering. He is also the author of the Electronics Assembly Materials blog http://blogs.indium.com/blog/mario-scalzos-tech-support-blog.
Chris Anglin has over 15 years of experience in advanced process development, new product introduction, and electronics assembly manufacturing.  He has a master’s degree in Industrial Engineering from the State University of New York at Binghamton. He is trained in Six Sigma Black Belt programs and is also an SMTA-Certified Process engineer. 
For more information about the technical conferences and APEX, visit http://www.goipcshows.org.
Indium Corporation is a premiere materials supplier to the global electronics, semiconductor, solar, thin film and thermal management markets.  Products include solders, preforms, and fluxes; brazes; sputter targets; indium, gallium, and germanium chemicals and sourcing; and Reactive NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit https://www.indium.com or email [email protected].