Cinq experts en technologie d'Indium Corporation présenteront leurs travaux techniques lors du salon APEX qui se tiendra à Las Vegas, dans le Nevada, du 6 au 9 avril 2010.
- Ning-Cheng Lee, Ph.D., Vice-président de la technologie
- Ronald C. Lasky, Ph.D. PE, Technologue principal
- Mario Scalzo, ingénieur senior du support technique
- Eric Bastow, ingénieur principal du support technique
- Chris Anglin, Ingénieur en développement d'applications
Le Dr Lee présente trois communications, dont l'une intitulée « Technologie des flux sans plomb et son influence sur le nettoyage ». L'absence de plomb, les contraintes de coûts et la question récurrente de savoir « à quel point faut-il que ce soit propre ? » posent des défis permanents aux opérations d'assemblage. Cette communication aborde ces défis.
Mardi 6 avril – 13 h 30 – 15 h 00
Sélection des flux de soudage par immersion et des pâtes à souder pour l'assemblage PoP. Cet article aborde les perspectives du marché, les méthodologies de processus d'assemblage et les éléments d'infrastructure clés qui ont évolué pour permettre l'intégration des nouvelles générations de puces logiques et de mémoire discrètes hautes performances au sein d'un même boîtier.
Mercredi 7 avril – de 10 h 15 à 11 h 45
Obtention de joints de soudure SAC sans plomb, à haute fiabilité et à faible coût, grâce au dopage au Mn ou au Ce. Dans cette étude, des alliages SAC à faible teneur en Ag, dopés au Mn ou au Ce, ont été évalués par rapport à l'alliage eutectique SnPb, au SAC105 et au SAC305 lors d'essais de chute JEDEC, de flexion dynamique, de cycles thermiques et de flexion cyclique.
Mercredi 7 avril – 13 h 30 – 15 h 30
Il animera également une formation continue intitulée « Assurer une fiabilité élevée des joints de soudure sans plomb : considérations relatives aux matériaux ». Cette formation aborde la manière dont divers facteurs contribuent aux modes de défaillance, ainsi que la manière de choisir les alliages de soudure et les finitions de surface appropriés pour garantir une fiabilité élevée.
Vendredi 9 avril – 9 h 00 – 12 h 00
Dr. Lasky will be presenting a professional development course
Lead-Free Reliability
This course will cover how to develop a strategy for compliant electronic assembly with high yields and excellent reliability while complying with global environmental regulations.
· Thursday, April 8 – 9:00am – 12:00pm
Mario Scalzo; will be presenting the paper
Addressing the Challenge of Head-in-Pillow Defects in Electronics Assembly. This paper discusses the head-in-pillow failure mode and a strategy to minimize this troublesome defect.
· Wednesday, April 7 – 9:00 – 10:00am
He will also be presenting a paper authored by Tim Jensen
Challenges for Implementing a Halogen-Free Process.; Replacing halogenated compounds can have a dramatic affect on the PCB assembly process. This paper discusses those challenges, as well as techniques and practices that help ensure high end-of-line yields and continued reliability.
· Thursday, April 8 – 10:15 – 11:45am
Eric Bastow will be presenting
Understanding SIR. This paper will discuss the issue of SIR coupon preparation, board cleaning techniques, and how board cleanliness directly affects SIR results.
· Wednesday, April 7 – 10:15 – 11:45am
Chris Anglin will be presenting the paper
Stencil Printing Transfer Efficiency of Circular vs. Square Apertures with the Same Solder Paste Volume. This paper addresses the issues associated with stencil and squeegee design and the printing of paste for small passives.
· Thursday, April 8 – 10:15 – 11:45am
Indium Corporation is also exhibiting at booth #441.
Sponsored by IPC, this technical conference is known worldwide as one of the finest and most selective in the world.
Dr. Lee is a world-renown soldering expert and an SMTA Member of Distinction. He has extensive experience in the development of solder pastes, fluxes, high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. His current research interests cover advanced materials for interconnects and packaging for electronics and optoelectronics applications, with emphasis on both high-performance and low-cost of ownership. Dr. Lee is also a member of the SMTAI planning committee.
Dr. Lasky, holder of the prestigious SMTA Founder’s Award, is a world-renown process expert and an Instructional Professor at Dartmouth College. He has over 25 years of experience in electronics and optoelectronic packaging and assembly. He has authored or edited five books and numerous technical papers and holds several patent disclosures. Dr. Lasky also authors a technology blog which can be found at http://blogs.indium.com/blog/an-interview-with-the-professor.
Tim Jensen is the Product Manager for PCB Assembly Materials in Indium Corporation’s Solder Products Business Unit. He is an SMTA-Certified SMT Process Engineer. He has spent over a decade troubleshooting and optimizing SMT process lines. He works closely with Indium’s Technical Service, Research & Development, and Sales Teams to ensure that Indium continues to offer cutting edge products to meet unique challenges in the electronics assembly industry. Tim has a bachelor’s degree in Chemical Engineering from Clarkson University. He has authored several technical publications and numerous process and technical guidelines. Tim is a member of the SMTA and participates actively in several IPC standards development committees.
Eric Bastow joined Indium Corporation in 2001 developing new solder paste flux chemistries under the direction of Dr. Ning-Cheng Lee. He also gained experience performing residual gas analysis of hermetic electronic packages and developing electroless nickel-plating bath chemistries. Eric is an SMTA-certified process engineer (CSMTPE) and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College. He has an associate’s degree in Engineering Science from the State University of New York and has authored several technical papers and articles.
Mario Scalzo joined Indium Corporation in 2000. He holds a bachelor’s degree in Chemistry from Saint Anselm College. He also holds a certificate from the American Chemical Society for Professional Education. In addition, he is an SMTA-Certified Process Engineer and has a Six-Sigma Black Belt from Dartmouth College’s Thayer School of Engineering. He is also the author of the Electronics Assembly Materials blog http://blogs.indium.com/blog/mario-scalzos-tech-support-blog.
Chris Anglin has over 15 years of experience in advanced process development, new product introduction, and electronics assembly manufacturing. He has a master’s degree in Industrial Engineering from the State University of New York at Binghamton. He is trained in Six Sigma Black Belt programs and is also an SMTA-Certified Process engineer.
For more information about the technical conferences and APEX, visit http://www.goipcshows.org.
Indium Corporation is a premiere materials supplier to the global electronics, semiconductor, solar, thin film and thermal management markets. Products include solders, preforms, and fluxes; brazes; sputter targets; indium, gallium, and germanium chemicals and sourcing; and Reactive NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit https://www.indium.com or email [email protected].
