콘텐츠로 건너뛰기

APEX에서 발표하는 인듐 코퍼레이션의 기술 전문가들

인듐 코퍼레이션(Indium Corporation)의 기술 전문가 5명이 2010년 4월 6일부터 9일까지 네바다주 라스베이거스에서 열리는 APEX에서 기술 연구 결과를 발표할 예정입니다.

  • 이닝청(Ning-Cheng Lee) 박사, 기술 부사장
  • 로널드 C. 라스키, 박사, PE, 선임 기술자
  • 마리오 스칼조, 선임 기술 지원 엔지니어
  • 에릭 바스토우, 선임 기술 지원 엔지니어
  • 크리스 앵글린, 애플리케이션 개발 엔지니어

이 박사는 ‘무연 플럭스 기술 및 세정에 미치는 영향’을 주제로 세 편의 논문을 발표합니다 . 무연화, 비용 압박, 그리고 “얼마나 깨끗해야 깨끗한가?”라는 끝없는 의문은 조립 공정에 끊임없는 과제를 안겨줍니다. 이 논문은 이러한 과제들을 다루고 있습니다.

4월 6일 화요일 – 오후 1시 30분 – 3시

PoP 조립을 위한 침지 전사 플럭스 및 솔더 페이스트 선정. 본 논문에서는 차세대 고성능 개별 로직 및 메모리 다이 소자를 단일 패키지 외형 내에 통합할 수 있도록 발전해 온 시장 전망, 조립 공정 방법론 및 핵심 인프라 요소에 대해 논의한다.

4월 7일 수요일 – 오전 10시 15분 – 11시 45분

Mn 또는 Ce 도핑을 통한 고신뢰성·저비용 무연 SAC 솔더 접합부 구현. 본 연구에서는 Mn 또는 Ce가 도핑된 저은(Ag) 함량 SAC 합금을 공융 SnPb, SAC105 및 SAC305와 비교하여 JEDEC 낙하 시험, 동적 굽힘 시험, 온도 사이클링 시험 및 주기적 굽힘 시험을 통해 평가하였다.

4월 7일 수요일 – 오후 1시 30분 – 3시 30분

또한 그는 ‘무연 솔더 접합부의 높은 신뢰성 달성 – 재료 고려 사항’이라는 전문 역량 개발 과정을 진행할 예정입니다. 이 과정에서는 다양한 요인이 고장 양상에 어떻게 영향을 미치는지, 그리고 높은 신뢰성을 달성하기 위해 적절한 솔더 합금과 표면 처리를 어떻게 선정해야 하는지에 대해 다룹니다.

4월 9일 금요일 – 오전 9:00 – 오후 12:00

Dr. Lasky will be presenting a professional development course
Lead-Free Reliability
This course will cover how to develop a strategy for compliant electronic assembly with high yields and excellent reliability while complying with global environmental regulations.
·     Thursday, April 8 – 9:00am – 12:00pm
Mario Scalzo; will be presenting the paper
Addressing the Challenge of Head-in-Pillow Defects in Electronics Assembly. This paper discusses the head-in-pillow failure mode and a strategy to minimize this troublesome defect.
·     Wednesday, April 7 – 9:00 – 10:00am 
He will also be presenting a paper authored by Tim Jensen
Challenges for Implementing a Halogen-Free Process.; Replacing halogenated compounds can have a dramatic affect on the PCB assembly process. This paper discusses those challenges, as well as techniques and practices that help ensure high end-of-line yields and continued reliability.
·     Thursday, April 8 – 10:15 – 11:45am
Eric Bastow will be presenting
Understanding SIR. This paper will discuss the issue of SIR coupon preparation, board cleaning techniques, and how board cleanliness directly affects SIR results.
·     Wednesday, April 7 – 10:15 – 11:45am
Chris Anglin will be presenting the paper
Stencil Printing Transfer Efficiency of Circular vs. Square Apertures with the Same Solder Paste Volume. This paper addresses the issues associated with stencil and squeegee design and the printing of paste for small passives.
·     Thursday, April 8 – 10:15 – 11:45am
Indium Corporation is also exhibiting at booth #441.
Sponsored by IPC, this technical conference is known worldwide as one of the finest and most selective in the world.   
Dr. Lee is a world-renown soldering expert and an SMTA Member of Distinction. He has extensive experience in the development of solder pastes, fluxes, high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. His current research interests cover advanced materials for interconnects and packaging for electronics and optoelectronics applications, with emphasis on both high-performance and low-cost of ownership. Dr. Lee is also a member of the SMTAI planning committee.
Dr. Lasky, holder of the prestigious SMTA Founder’s Award, is a world-renown process expert and an Instructional Professor at Dartmouth College. He has over 25 years of experience in electronics and optoelectronic packaging and assembly. He has authored or edited five books and numerous technical papers and holds several patent disclosures. Dr. Lasky also authors a technology blog which can be found at http://blogs.indium.com/blog/an-interview-with-the-professor.
Tim Jensen is the Product Manager for PCB Assembly Materials in Indium Corporation’s Solder Products Business Unit. He is an SMTA-Certified SMT Process Engineer. He has spent over a decade troubleshooting and optimizing SMT process lines. He works closely with Indium’s Technical Service, Research & Development, and Sales Teams to ensure that Indium continues to offer cutting edge products to meet unique challenges in the electronics assembly industry. Tim has a bachelor’s degree in Chemical Engineering from Clarkson University. He has authored several technical publications and numerous process and technical guidelines. Tim is a member of the SMTA and participates actively in several IPC standards development committees.
Eric Bastow joined Indium Corporation in 2001 developing new solder paste flux chemistries under the direction of Dr. Ning-Cheng Lee. He also gained experience performing residual gas analysis of hermetic electronic packages and developing electroless nickel-plating bath chemistries. Eric is an SMTA-certified process engineer (CSMTPE) and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College. He has an associate’s degree in Engineering Science from the State University of New York and has authored several technical papers and articles.
Mario Scalzo joined Indium Corporation in 2000. He holds a bachelor’s degree in Chemistry from Saint Anselm College. He also holds a certificate from the American Chemical Society for Professional Education. In addition, he is an SMTA-Certified Process Engineer and has a Six-Sigma Black Belt from Dartmouth College’s Thayer School of Engineering. He is also the author of the Electronics Assembly Materials blog http://blogs.indium.com/blog/mario-scalzos-tech-support-blog.
Chris Anglin has over 15 years of experience in advanced process development, new product introduction, and electronics assembly manufacturing.  He has a master’s degree in Industrial Engineering from the State University of New York at Binghamton. He is trained in Six Sigma Black Belt programs and is also an SMTA-Certified Process engineer. 
For more information about the technical conferences and APEX, visit http://www.goipcshows.org.
Indium Corporation is a premiere materials supplier to the global electronics, semiconductor, solar, thin film and thermal management markets.  Products include solders, preforms, and fluxes; brazes; sputter targets; indium, gallium, and germanium chemicals and sourcing; and Reactive NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit https://www.indium.com or email [email protected].