インジウム・コーポレーションの技術専門家5名が、2010年4月6日から9日までネバダ州ラスベガスで開催されるAPEXにて、技術的な研究成果を発表します。
- 技術担当副社長、李寧成博士
- ロナルド・C・ラスキー、PE博士、シニアテクノロジスト
- マリオ・スカルゾ、シニアテクニカルサポートエンジニア
- エリック・バストウ、シニア・テクニカル・サポート・エンジニア
- クリス・アングリン、アプリケーション開発エンジニア
リー博士は、「鉛フリーフラックス技術と洗浄への影響」を含む3本の論文を発表します。鉛フリー化、コスト面での圧力、そして「どの程度まで洗浄すれば十分か」という尽きることのない問いは、組立工程に絶え間ない課題をもたらしています。本論文では、これらの課題について論じています。
4月6日(火) 午後1時30分~3時00分
PoP実装向けディップ転写フラックスおよびはんだペーストの選定。本論文では、新世代の高性能ディスクリートロジックおよびメモリダイ素子を単一のパッケージアウトライン内に統合することを可能にするために発展してきた、市場の見通し、実装プロセスの手法、および主要なインフラ要素について論じる。
4月7日(水) 午前10時15分~11時45分
MnまたはCeのドープによる高信頼性・低コストの鉛フリーSACはんだ接合の実現。本研究では、MnまたはCeをドープした低Ag SAC合金を、共晶SnPb、SAC105、およびSAC305と比較し、JEDEC落下試験、動的曲げ試験、温度サイクル試験、および繰返し曲げ試験について評価を行った。
4月7日(水) 午後1時30分~3時30分
また、彼は「鉛フリーはんだ接合部の高い信頼性を実現する――材料の考慮点」と題した専門能力開発コースも開催する予定です。このコースでは、複数の要因がどのように故障モードに関与するか、また高い信頼性を実現するために適切なはんだ合金や表面処理をどのように選定すべきかについて解説します。
4月9日(金) 午前9時~午後12時
Dr. Lasky will be presenting a professional development course
Lead-Free Reliability
This course will cover how to develop a strategy for compliant electronic assembly with high yields and excellent reliability while complying with global environmental regulations.
· Thursday, April 8 – 9:00am – 12:00pm
Mario Scalzo; will be presenting the paper
Addressing the Challenge of Head-in-Pillow Defects in Electronics Assembly. This paper discusses the head-in-pillow failure mode and a strategy to minimize this troublesome defect.
· Wednesday, April 7 – 9:00 – 10:00am
He will also be presenting a paper authored by Tim Jensen
Challenges for Implementing a Halogen-Free Process.; Replacing halogenated compounds can have a dramatic affect on the PCB assembly process. This paper discusses those challenges, as well as techniques and practices that help ensure high end-of-line yields and continued reliability.
· Thursday, April 8 – 10:15 – 11:45am
Eric Bastow will be presenting
Understanding SIR. This paper will discuss the issue of SIR coupon preparation, board cleaning techniques, and how board cleanliness directly affects SIR results.
· Wednesday, April 7 – 10:15 – 11:45am
Chris Anglin will be presenting the paper
Stencil Printing Transfer Efficiency of Circular vs. Square Apertures with the Same Solder Paste Volume. This paper addresses the issues associated with stencil and squeegee design and the printing of paste for small passives.
· Thursday, April 8 – 10:15 – 11:45am
Indium Corporation is also exhibiting at booth #441.
Sponsored by IPC, this technical conference is known worldwide as one of the finest and most selective in the world.
Dr. Lee is a world-renown soldering expert and an SMTA Member of Distinction. He has extensive experience in the development of solder pastes, fluxes, high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. His current research interests cover advanced materials for interconnects and packaging for electronics and optoelectronics applications, with emphasis on both high-performance and low-cost of ownership. Dr. Lee is also a member of the SMTAI planning committee.
Dr. Lasky, holder of the prestigious SMTA Founder’s Award, is a world-renown process expert and an Instructional Professor at Dartmouth College. He has over 25 years of experience in electronics and optoelectronic packaging and assembly. He has authored or edited five books and numerous technical papers and holds several patent disclosures. Dr. Lasky also authors a technology blog which can be found at http://blogs.indium.com/blog/an-interview-with-the-professor.
Tim Jensen is the Product Manager for PCB Assembly Materials in Indium Corporation’s Solder Products Business Unit. He is an SMTA-Certified SMT Process Engineer. He has spent over a decade troubleshooting and optimizing SMT process lines. He works closely with Indium’s Technical Service, Research & Development, and Sales Teams to ensure that Indium continues to offer cutting edge products to meet unique challenges in the electronics assembly industry. Tim has a bachelor’s degree in Chemical Engineering from Clarkson University. He has authored several technical publications and numerous process and technical guidelines. Tim is a member of the SMTA and participates actively in several IPC standards development committees.
Eric Bastow joined Indium Corporation in 2001 developing new solder paste flux chemistries under the direction of Dr. Ning-Cheng Lee. He also gained experience performing residual gas analysis of hermetic electronic packages and developing electroless nickel-plating bath chemistries. Eric is an SMTA-certified process engineer (CSMTPE) and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College. He has an associate’s degree in Engineering Science from the State University of New York and has authored several technical papers and articles.
Mario Scalzo joined Indium Corporation in 2000. He holds a bachelor’s degree in Chemistry from Saint Anselm College. He also holds a certificate from the American Chemical Society for Professional Education. In addition, he is an SMTA-Certified Process Engineer and has a Six-Sigma Black Belt from Dartmouth College’s Thayer School of Engineering. He is also the author of the Electronics Assembly Materials blog http://blogs.indium.com/blog/mario-scalzos-tech-support-blog.
Chris Anglin has over 15 years of experience in advanced process development, new product introduction, and electronics assembly manufacturing. He has a master’s degree in Industrial Engineering from the State University of New York at Binghamton. He is trained in Six Sigma Black Belt programs and is also an SMTA-Certified Process engineer.
For more information about the technical conferences and APEX, visit http://www.goipcshows.org.
Indium Corporation is a premiere materials supplier to the global electronics, semiconductor, solar, thin film and thermal management markets. Products include solders, preforms, and fluxes; brazes; sputter targets; indium, gallium, and germanium chemicals and sourcing; and Reactive NanoFoil®. Founded in 1934, Indium has global technical support and factories located in China, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit https://www.indium.com or email [email protected].
