Indium Corporation Expert to Host Intermetallics Webinar
August 31, 2021
Indium Corporation’s Ron Lasky, Ph.D., PE, senior technologist, will host a webinar on intermetallics and their importance to solder joints on Tuesday, Sept. 21, 10 a.m. San Francisco/1 p.m. New York/6 p.m. London/7 p.m. Germany as part of the company’s free webinar program, the InSIDER Series.
The formation of copper-tin intermetallics is fundamental to a functional solder joint. In creating most solder joints, two pieces of copper—which melt at 1085°C—are bonded together with solder, at less than 250°C.
“Most of us, with years of experience in electronic assembly, don’t usually think of this technological ‘miracle’ of soldering. We are able to bond two pieces of copper together at a temperature low enough where the bonding can be performed in the presence of polymer material. Without this low-temperature formation of copper-tin intermetallics, the electronic industry might not exist,” said Dr. Lasky. “However, contemporary wisdom is that these intermetallics are brittle and can result in poor thermal cycle or drop shock performance.”
In this webinar, Dr. Lasky will review the formation of copper-tin intermetallics, their growth rate, their effect on thermal cycle life, and drop shock performance. The brittle nature of copper-tin intermetallics will also be discussed. In addition, several graphs of intermetallic growth rate will be presented. Some of the additional ancillary effects of copper-tin intermetallic growth—such as tin whiskers and their mitigation—will also be discussed.
Dr. Lasky’s webinar is offered as part of Indium Corporation’s free webinar program, the InSIDER Series. You can register for his webinar at https://indium.news/3zosh98.
Dr. Lasky is a senior technologist at Indium Corporation, as well as a professor of engineering and the director of the Lean Six Sigma program at Dartmouth College in Hanover, N.H., U.S. He has more than 30 years of experience in electronics and optoelectronics packaging at IBM, Universal Instruments, and Cookson Electronics. Dr. Lasky has authored six books, and contributed to nine more, on science, electronics, and optoelectronics, and has authored numerous technical papers. Additionally, he has served as an adjunct professor at several colleges, teaching more than 20 different courses on topics ranging from electronics packaging, materials science, physics, mechanical engineering, and science and religion. Dr. Lasky holds numerous patent disclosures and is the developer of several SMT processing software products relating to cost estimating, line balancing, and process optimization. He is the co-creator of Surface Mount Technology Association’s (SMTA) SMT Process Engineering Certification program and exams that set standards in the electronics assembly industry worldwide. Dr. Lasky was awarded SMTA’s Founder’s Award in 2003.
About Indium Corporation
Indium Corporation is a premier materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Germany, India, Malaysia, Singapore, South Korea, the United Kingdom, and the U.S.
For more information about Indium Corporation, visit www.indium.com or email Jingya Huang. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.linkedin.com/company/indium-corporation/ or @IndiumCorp.