Press Releases

June 18, 2013

Indium8.9HFA Solder Paste Sees Accelerated Adoption for Miniaturized Assemblies

Indium Corporation’s Indium8.9HFA Solder Paste is a versatile, halogen-free, Pb-free, solder paste with leading print performance on miniaturized components. Assemblers and OEMs are adopting

June 4, 2013

Indium Corporation Technology Expert to Deliver Webtorial on Top Pb-free PCB Assembly Defects

Indium Corporations Tim Jensen, Product Manager PCB Assembly Materials, will present a two-part webtorial, titled Top Pb-Free PCB Assembly Defects: Cause and Cure, as part of a webtorial series

May 30, 2013

Indium Corporation Technical Support Engineer to Participate in Session at SMTA Space Coast

Indium Corporation’s Ed Briggs, Technical Support Engineer, Southeast USA and Eastern Canada, will participate in the Solder Joint Failure Analysis session at the Surface Mount Technology

May 29, 2013

Indium Corporation Technology Expert to Present at IPC Medical Devices Conference

Indium Corporations Dr. Ning-Cheng Lee, Vice President of Technology, will present at IPCs Innovations in Electronics Manufacturing for Medical Devices conference Wednesday, June 12 in Minneapolis,

May 22, 2013

Indium Corporation Technology Expert to Present at ECTC

Indium Corporation’s Dr. Ning-Cheng Lee, Vice President of Technology, will give several presentations at the 63rd Electronic Components and Technology Conference (ECTC) May 28-31 in Las Vegas,

May 9, 2013

Indium Corporation Technology Expert to Present at IMAPS Advanced Technology Workshop

Indium Corporation’s Brook Sandy-Smith, Product Support Specialist – PCB Assembly Materials, will present at the International Microelectronics and Packaging Society (IMAPS) Advanced

May 8, 2013

Indium Corporation Product Specialist to Present at Inaugural ESTC Conference

Indium Corporations Brook Sandy-Smith, Product Specialist PCB Assembly Materials, will present at the inaugural Electronic System Technologies Conference May 20-23 in Las Vegas, Nev. Sandy-Smith will

May 7, 2013

Indium Corporation Product Specialist to Present at ICSR

Indium Corporation’s Brook Sandy-Smith, Product Support Specialist – PCB Assembly Materials, will present at the International Conference on Soldering and Reliability on Friday, May 17 in

May 7, 2013

Indium Corporation Features Heat-Spring at PCIM

Indium Corporation will feature Heat-Spring® thermal interface materials at PCIM Europe, May 14-16, in Nuremberg, Germany. Heat-Spring®, a compressible thermal interface material (TIM), is a

May 2, 2013

Indium Corporation Announces Void-Reducing Water-Soluble Solder Paste

Indium6.4 Water-Soluble Solder Paste’s flux chemistry minimizes voiding under QFN and BGA assemblies. A typical water-soluble solder paste has approximately 15-30 percent voiding; however,

May 1, 2013

Indium Corporation Technology Experts to Present at IMAPS New England

Several Indium Corporation technology experts will present their technical findings at the International Microelectronics and Packaging Society (IMAPS) New England Chapter Symposium May 7 in

April 30, 2013

Indium Corporation’s Engineered Solder Material Expert to Present at PCIM Europe

Indium Corporation’s Karthik Vijay, Technical Manager for Europe, Africa, and the Middle East, will present at PCIM Europe 2013 at 10 a.m., Thursday, May 16 in Nuremberg,

April 24, 2013

Indium Corporation Product Manager to Present at IMAPS Workshop

Indium Corporation’s Andy C. Mackie, PhD, MSc, will share his expertise at the IMAPS Advanced Technology Workshop on Packaging the Next Generation of Nano Devices April 30-May 1 in Albany, N.Y.

April 23, 2013

Indium Corporation Features SACm at ESTC: New, Low-Cost, High-Reliability SAC Solder Alloy

Indium Corporation will feature its new SACm™ solder alloy at the inaugural ESTC exhibition May 21-22 in Las Vegas, Nev. SACm™ is a high-reliability, low-cost solder alloy that offers

April 17, 2013

Indium Corporation Features NanoFoil at SVC Technical Conference

Indium Corporation will feature NanoFoil® at the Society of Vacuum Coaters (SVC) Technical Conference April 23-24 in Providence, R.I. NanoFoil® is an engineered material that enables room

April 9, 2013

Indium Corporation Technology Experts to Present at SMTA Technical Conference

Indium Corporation’s Tim Jensen, Product Manager – PCB assembly materials; Dr. Yan Liu, Research Chemist; and Sehar Samiappan, Area Technical Manager for North Malaysia, the Philippines,

April 9, 2013

Indium Corporation Technology Experts Presenting at SVC

Indium Corporation’s Jacques Matteau, Global Sales Manager – NanoBond® and NanoFoil®, and Jim Hisert, PV Applications Engineer, will present at the Society of Vacuum Coaters (SVC)

April 4, 2013

Indium Corporation Technology Expert to Present at SMTA Silicon Valley

Indium Corporation’s Joe Bahou, Technical Sales Support Engineer – West Coast, will present at the SMTA’s Silicon Valley chapter meeting on April 11. Bahou’s presentation,

March 27, 2013

Indium Corporation Creates Nanotechnology Team

Indium Corporation announces the creation of a Nanotechnology Team to support Indium Corporations continued expansion into novel nanotechnology materials and markets. Nanotechnology is a term that

March 21, 2013

Indium Corporation’s Derrick Herron Named Technical Support Engineer

Indium Corporation announces the appointment of Derrick Herron to Technical Support Engineer for the Northeastern United States. In this role, Herron will provide comprehensive technical advice in

March 20, 2013

Indium Corporation Technologists to Present at SMT Hybrid Packaging

Indium Corporation’s Ning-Cheng Lee, Vice President of Technology; Karthik Vijay, Technical Manager – Europe, Africa, and the Middle East; and Wolfgang Bloching, Regional Sales Manager