Blog

Folks, Patty had just returned from SMTAI 2015. It was a sentimental meeting with the retirement of longtime executive administrator JoAnn Stromberg. At one of the technical sessions, Patty was

Another advantage of Indium Corporation's epoxy flux, such as the 756-72, compared to underfill and other competitive epoxy flux options is that our epoxy flux is reworkable.The rework procedure

With the exception of the automated system mentioned in my last post, there is little difference in the actual performance of the various forms of preheaters. The choice is based on convenience and

The dipping process is convenient for the application of epoxy flux because most pick-and-place equipment already has dipping units installed. So, there is no need for extra equipment or the costs

As discussed previously, the temperature of the preheater has little comparison with the actual temperature of the PCB. By implementing a dual preheater system, where there is an infrared heat sensor

Applying Epoxy flux using a dipping process is similar to the dipping process with conventional PoP flux, with the exception of the flux coverage of the component bump.With conventional PoP flux or

Mọi người ơi, có vẻ như Patty hơi có vấn đề……. Khi còn nhỏ, Patty luôn khó chịu với những người già cáu kỉnh, và bây giờ cô ấy lo lắng rằng mình có thể trở thành một người như vậy. Nguyên nhân là

As I mentioned in my previous post, the goal of preheating, regardless of method used, is to increase the metallic structure of the joint to a specified

Due to the recent increase in interest regarding Epoxy Flux, there are a number of general questions that many people have had about the this unique enabling technology.I decided to sit down with the

Phil Zarrow: With the advent of bottom terminating components, one of the nemesis of the electronic assembler is voiding in the thermal ground pad of the BTC component. Derrick Herron:

The next few posts come to us from my colleagues Karthik Vijay, Indium Corporation’s Technical Manager for Europe, and Liam Mills of TT Electronics Power and Hybrid. They’ve done some

Often times, people assume that the dipping process is easy. It is…once you have taken the time up-front to optimize the process.This optimization can take a bit of time and trial and error.

Folks, it has been a while. Let’s look in on Patty…. Patty stared at her new Apple® Watch and was pleased. What was most pleasing is that she didn’t expect to be pleased. She heard many

The next few posts come to us from my colleagues Karthik Vijay, Indium Corporation’s Technical Manager for Europe and Liam Mills of TT Electronics Power and Hybrid. They’ve done some

Folks, The Wet Gold Technique is a simple way to estimate the percentage of gold in a gold alloy. This technique indirectly measures the density of the alloy. From the density of the alloy one can

Mọi người ơi, chúng ta hãy đến thăm Rob, trong khi Patty đi vắng…… Rob vẫy tay chào tạm biệt Patty khi cô ấy lái xe đến sân bay để tham dự một hội nghị kéo dài một tuần. Bây giờ cô ấy là giáo sư và anh ấy là sinh viên sau đại học

Lamp style preheaters have the fastest response time of any of the previous preheaters mentioned in other posts. The lamp filament is practically the sole thermal mass; it is so fast that the

Trong ngành sản xuất điện tử ngày nay, nhiều công ty đang sử dụng hợp kim hàn không chì. Tuy nhiên, có một số ngành trong ngành thích độ tin cậy và hiệu suất của

As a follow up to my post on quartz plate preheaters for wave soldering, this post isdedicated to the very similar quartz tube preheater. If you remember, one of the advantages of using a quartz

We continue our discussion of solder reflow methods. As the name suggests, quartz plate preheaters have thick quartz plates in which the heating elements are embedded via pockets or slots. The

My last post talked about the pros and cons of CalRod® style preheaters. This post will be devoted to hot air style preheaters. It makes sense that this was, most likely, the first form of