블로그

Folks, Patty had just returned from SMTAI 2015. It was a sentimental meeting with the retirement of longtime executive administrator JoAnn Stromberg. At one of the technical sessions, Patty was

언더필 및 기타 경쟁사 에폭시 플럭스 옵션에 비해 756-72와 같은 Indium Corporation의 에폭시 플럭스의 또 다른 장점은 재작업이 가능하다는 점입니다.

With the exception of the automated system mentioned in my last post, there is little difference in the actual performance of the various forms of preheaters. The choice is based on convenience and

The dipping process is convenient for the application of epoxy flux because most pick-and-place equipment already has dipping units installed. So, there is no need for extra equipment or the costs

As discussed previously, the temperature of the preheater has little comparison with the actual temperature of the PCB. By implementing a dual preheater system, where there is an infrared heat sensor

Applying Epoxy flux using a dipping process is similar to the dipping process with conventional PoP flux, with the exception of the flux coverage of the component bump.With conventional PoP flux or

여러분, 패티가 좀 고민이 있는 것 같아요....... 패티는 어렸을 때 괴팍한 노인들 때문에 항상 짜증이 났고, 이제는 자신이 그렇게 될까 봐 걱정하고 있었습니다. 그 계기가

As I mentioned in my previous post, the goal of preheating, regardless of method used, is to increase the metallic structure of the joint to a specified

Due to the recent increase in interest regarding Epoxy Flux, there are a number of general questions that many people have had about the this unique enabling technology.I decided to sit down with the

Phil Zarrow: With the advent of bottom terminating components, one of the nemesis of the electronic assembler is voiding in the thermal ground pad of the BTC component. Derrick Herron:

The next few posts come to us from my colleagues Karthik Vijay, Indium Corporation’s Technical Manager for Europe, and Liam Mills of TT Electronics Power and Hybrid. They’ve done some

흔히 사람들은 디핑 과정이 쉽다고 생각합니다. 프로세스를 최적화하기 위해 미리 시간을 투자한다면 그렇지만, 이 최적화에는 약간의 시간과 시행착오가 필요할 수 있습니다.

Folks, it has been a while. Let’s look in on Patty…. Patty stared at her new Apple® Watch and was pleased. What was most pleasing is that she didn’t expect to be pleased. She heard many

The next few posts come to us from my colleagues Karthik Vijay, Indium Corporation’s Technical Manager for Europe and Liam Mills of TT Electronics Power and Hybrid. They’ve done some

Folks, The Wet Gold Technique is a simple way to estimate the percentage of gold in a gold alloy. This technique indirectly measures the density of the alloy. From the density of the alloy one can

여러분, 패티가 자리를 비운 동안 Rob의 근황을 확인해 봅시다...... Rob은 일주일간의 컨퍼런스에 참석하기 위해 공항으로 떠나는 패티에게 작별인사를 건넸습니다. 이제 그녀는 교수가 되었고 그는 대학원생이 되었습니다.

Lamp style preheaters have the fastest response time of any of the previous preheaters mentioned in other posts. The lamp filament is practically the sole thermal mass; it is so fast that the

오늘날의 전자 제품 제조 업계에서는 많은 기업이 무연 솔더 합금을 사용하고 있습니다. 그러나 업계에는 다음과 같은 신뢰성과 성능을 선호하는 몇 가지 분야가 있습니다.

As a follow up to my post on quartz plate preheaters for wave soldering, this post isdedicated to the very similar quartz tube preheater. If you remember, one of the advantages of using a quartz

We continue our discussion of solder reflow methods. As the name suggests, quartz plate preheaters have thick quartz plates in which the heating elements are embedded via pockets or slots. The

My last post talked about the pros and cons of CalRod® style preheaters. This post will be devoted to hot air style preheaters. It makes sense that this was, most likely, the first form of