Indium Corporation’s Eric Bastow, Assistant Technical Manager for the Americas, will present at 2016 Medical Electronics Symposium on Sept. 14-15 in Portland, Ore.
As no-clean soldering processes continue to dominate the electronics manufacturing world, ever-increasing miniaturization is putting pressure on solder paste manufacturers to produce solder pastes that can reliably print through smaller and smaller stencil apertures.
Bastow’s presentation provides an answer to the question: Does Solder Particle Size Impact the Electrical Reliability of a No-Clean Solder Paste Flux Residue? Bastow uses IPC J-STD-004B SIR (Surface Insulation Resistance) testing to determine if there is a measurable impact on the electrical reliability and, if so, is it substantial enough to be a cause for concern?
Bastow provides technical support for Indium Corporation’s full range of solder products for the electronics assembly, semiconductor packaging, and thermal management markets to customers throughout the Americas. He is an SMTA-certified process engineer and has earned his Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College, Hanover, NH.
Indium Corporation è uno dei principali produttori e fornitori di materiali per i mercati globali dell'elettronica, dei semiconduttori, dei film sottili, della gestione termica e del solare. I prodotti includono saldature e flussanti, brasature, materiali per interfacce termiche, bersagli per sputtering, metalli e composti inorganici di indio, gallio, germanio e stagno e NanoFoil®. Fondata nel 1934, Indium dispone di un'assistenza tecnica globale e di stabilimenti situati in Cina, Malesia, Singapore, Corea del Sud, Regno Unito e Stati Uniti.
For more information about Indium Corporation, visit indiumstg.wpenginepowered.com or email [email protected]. You can also follow our experts From One Engineer To Another® (#FOETA) at www.facebook.com/indium or @IndiumCorp.
