Related Thermal Interface Materials Videos
LV1000 Flux-Coated Preform - Voiding Solution
How to Release Liner from HSMF Thermal Interface Materials (TIMs)
InFORMS® - A Different Kind of Preform
Features & Benefits
All of our thermal interface materials are metal-based, which means they have a very high conductivity as compared to polymer-based thermal interface materials. Indium metal, for example, has a conductivity of 86W/mK and is 4 times softer than lead. Its ductility and thermal conductivity make it ideal as a compressible thermal interface material.
Many applications call for a TIM (thermal interface material) that can easily be placed on a chip, on a lid, or, perhaps, just against a heat source and a cooling solution contact plate. We developed a metal TIM which works as a compressible Interface Solution for such an application. Our pressure range is 35 psi to 100+ psi.
An SMA-TIM (soft metal alloy) made of indium offers uniform thermal resistance at lower applied stresses in compressed interfaces. The malleability of indium minimizes surface resistance and increases heat flow (conductance). Our patented Heat-Spring® technology further reduces the thermal resistance and enhances cooling.
Indium's high-end thermal interface materials deliver superior performance over time. Because SMA-TIM products are made of metal, they cannot experience pump out problems - even under power cycling. Our Heat-Spring® material, which does not contain silicone, conforms to surface disparities, reducing thermal resistance through the life of the TIM. Due to its solid state, the SMA-TIM also does not bake out.
The m2TIM™ is a unique solid/liquid hybrid thermal interface material that combines liquid metal with a solid metal preform to provide reliable thermal conductivity while eliminating the need for a solderable surface.
InGa and InGaSn alloys are liquid at room temperature. Using one of these alloys alone would provide superior thermal conductivity, but would also require containment of the liquid. Introducing a solid solder preform into the process gives you a material that absorbs the liquid and provides the necessary containment without compromising the thermal conductivity. This hybrid approach offers excellent surface wetting and low interfacial resistance, as well as eliminating the risk of pump-out of the liquid alloy.
Metal thermal interface materials (TIMs) are known to have higher isotropic thermal conductivity than any non-metals. Metals conduct heat and electricity with their valence electrons. This very effective conduction mechanism is a property of liquid as well as solid metals and alloys. In addition to the high thermal conductivity of all metals, those in the liquid form will also exhibit low interfacial resistance, ensuring that they can dissipate heat quickly. Liquid metals are used in both TIM1 and TIM2 applications.
HSMF and HSMF-OS
HSMF is a compressible thermal interface materials made of a non-silicone-based polymer. It is ideal for large area thermal interface requirements, such as IGBTs, which can benefit from the 0.010” thickness. It is also helpful for die-cast heat-sinks with poor planarity. Assembly is efficient as this material has an inherent adhesive property on both sides that allow for easy placement.
HSMF-OS is ideal for burn-in applications due to its reliability and ease of use. It has adhesive properties on just one side that allow for hand placement, removing the need for additional steps and fixtures. HSMF-OS is designed for high-insertion capability. Its tensile strength of ~90MPa and soft compliant polymer backing provides a configuration with “designed in” insertion survivability.
Several very low melting point Indalloy® alloys are liquid at room temperature. These gallium-based alloys are finding increased use in various applications as a replacement for toxic mercury, which has a high vapor pressure at room temperature. These alloys have reduced toxicity and lower vapor pressure than mercury.
Excellent Thermal and Electrical Conductivity
Alloy systems that are liquid at room temperature have a high degree of thermal conductivity far superior to ordinary nonmetallic liquids. This results in the use of these materials for specific heat conducting and/or dissipation applications. Other advantages of these liquid alloy systems are their inherent high densities and electrical conductivities.
m2TIM™ is a unique solid/liquid hybrid approach that combines liquid metal with a solid metal preform to provide reliable thermal conductivity while eliminating the need for a solderable surface. This hybrid approach provides excellent surface wetting and low interfacial resistance, as well as eliminating the risk of pump-out of the liquid alloy.
Extraordinary Wetting Ability to Both Metallic and Non-Metallic Surfaces
These alloys will wet most metallic surfaces once oxides have been sufficiently removed from the substrate surface. However, gallium is very reactive with some metals, even at room temperature. At high temperatures, gallium dissolves most metals, although a number, including Na, K, Au, Mg, Pb, Ni and interestingly Hg, are only slightly soluble at moderate temperatures.1
Note: These alloys form a thin dull looking oxide skin that is easily dispersed with mild agitation. The oxide-free surfaces are bright and lustrous.
Typical applications for these materials include thermostats, switches, barometers, heat transfer systems, and thermal cooling and heating designs. Uniquely, they can be used to conduct heat and/or electricity between non-metallic and metallic surfaces.
Alloys are packaged in polyethylene bottles and shipped in accordance with applicable federal regulations.
Unopened bottles have a guaranteed one year shelf life. It is recommended that, as the alloy is removed from the bottle, the volume be replaced with dry argon. This will minimize the possibility of oxidation at the surface of the alloy. If the alloy has been stored below its melting point and has solidified, it should be re-melted and thoroughly shaken or mixed before use. Care should be taken in reheating the alloy in the original packaging provided. Temperatures should not exceed 65.6°C.
1. K. Wade and A.J. Banister, "The Chemistry of ALUMINUM, GALLIUM, INDIUM, and THALLIUM", Pergamon Texts in Inorganic Chemistry, Vol. 12, 1975.
Indium Corporation’s Solder Thermal Interface Materials radically improve:
- Heat dissipation efficiency in electronic devices
- Thermal conductance for high power devices – with densities in excess of 1000 watts
- End-of-life performance at the thermal interface – to avoid failures common with fluidic solutions such as greases
- Portable device battery performance – by reducing thermal resistance and cooling fan size
- Portable device use profile – by reducing heatsink size and mass
- Compliance with RoHS while accommodating step soldering requirements
Indium Corporation has solutions for:
- Power Devices
Indium Corporation recognizes the Importance of confidentiality in the design of thermal interface solutions. As a trusted partner, our engineers will work with you to help you find the right solution for your thermal interface problems. We can help you find the right alloy for performance and the best solder form for ease of assembly.
Some non-confidential applications include:
- Semiconductor Integrated Circuits
- Power QFNs
- Power device to PCB attach (TO220, etc.)
- Die Attach (Photonics, MOSFETS, etc.)
- LED attach
The Indium Advantage
We are committed to understand your unique needs for materials in your product and for your process. No company offers a wider selection of alloys and solder forms to meet your needs. Our variety of alloys, ability to fabricate and package these alloys into easy-to-use forms, and our decades of application knowledge are the core values we bring to your company. Tap into this knowledge-base by calling one of our certified engineers at 1-800-4-INDIUM or email us.