As part of its electric vehicle (EV) focused series of webinars, Driving e-Mobility: Rel-ion Technical Webinars, Indium Corporation‘s Jonas Sjoberg, associate director for global technical service & application engineering, and ngelo Marques, applications engineer design for excellence (DfX) specialist, will share considerations for the implementation of high-density assembly in the automotive space.
In Design Considerations for Board Layout and Material Selection, Sjoberg and Marques will discuss how implementing high-density SMTA assemblies in electronic products require many considerations. Previously, high-density SMTA assemblies were primarily used in mobile phones and consumer electronics. However, the rapid growth of EVs and more sophisticated electronics on all types of automobiles shows that these high-density assemblies are not being fully adapted into the automotive market. Before starting any developmental work or implementing a new technology, it is critical to understand the products, their capabilities, and industry requirements. If these are not fully understood, failure is the most probable outcome.
This presentation will discuss conducting DfX based on end-product requirements and the need to perform proper root cause analyses before making any material or process changes.
This session of Driving e-Mobility: Rel-ion Technical Webinar series is scheduled for Sept. 21 with two opportunities to participate: the first at 8:30 a.m. Germany/12 p.m. India/2:30 p.m. China and Malaysia, and the second at 10 a.m. San Francisco/1 p.m. New York/6 p.m. London/7 p.m. Germany.
DieWebinar-Reihe „Driving e-Mobility: Rel-ion Technical Webinars“präsentiert weltweit führende Fachexperten aus den Bereichen fortschrittliche Werkstoffe und Automobilmarkt. Moderiert werden alle Veranstaltungen vonBrian O’Leary, dem globalen Leiter für E-Mobilität und Infrastruktur bei der Indium Corporation. Diese Webinar-Reihe richtet sich speziell an alle, die im Bereich der E-Mobilität tätig sind – unabhängig davon, ob sie neu in der Branche sind oder bereits über mehrjährige Erfahrung verfügen –, da die Elektrofahrzeugbranche derzeit ein rasantes Wachstum und eine rasante Entwicklung durchläuft.
Registration for this webinaras well as the rest in this seriesis open and can be completed at indium.com/corporate/media-center/webinars/rel-ion.php. If you are interested in a session specifically tailored to your company’s needs, please contact Brian O’Leary.
Sjoberg is Associate Director for Global Technical Service & Application Engineering for Indium Corporation. He is based in Kuala Lumpur, Malaysia, where he provides technical support to key regional and global customers. He has more than 25 years of technical experience in the electronics industry, including developing and deploying leading-edge designs and processes for packaging and assembly; managing research and development projects and facilities; and serving as technical advisor to internal and external design, development, and manufacturing sites worldwide. He has presented and published numerous papers at industry leading electronic conferences/magazines and is an appointed distinguished speaker at SMTAI.
Marques’ expertise in automotive electronics, especially in DfX for stencils, PCBs, and complex components, continues to help Indium Corporation’s customers shorten DV / PV (design validation / production validation) lifecycles and launch earlier into SOP (Start of Production) with optimized manufacturing processes with reduced defects and increased yields. In addition to his new role as DfX Specialist, Marques continues to provide technical support, share process knowledge, and make recommendations for the use of Indium Corporation’s materials in PCBA throughout Europe’s Latin region as an applications engineer. An Indium Corporation employee since 2017, Marques possesses over 25 years of automotive electronics experience in new product introduction and process optimization. He has a Six Sigma Green Belt and is an IPC 610 certified trainer. He is trilingual and can speak and write Portuguese, English, and Spanish.
O’Leary is responsible for promoting Indium Corporation’s full range of products and services for e-Mobility, which includes electric cars, trucks, and charging stations. He has more than 20 years of experience in sales, marketing, and channel management in the electronics industry. He currently serves as the chair of the IPC EV (Electric Vehicle) Quality & Reliability Advisory Group. In addition to regular technical conference participation, Brian co-hosts a free monthly webcastEV InSIDER Livewith Loren McDonald of EVAdoption and a high-profile industry stakeholder as a guest. In the webcast, they discuss current pressing issues and hot topics in the rapidly evolving electric vehicle landscape.
The next session in the Driving e-Mobility: Rel-ion Technical Webinar series on Oct. 12 is Best Practices for SMT Assembly & Root Cause Analysis, presented by Principal Engineer, Global Accounts Technical Manager David Sbiroli.
Über Indium Corporation
Indium Corporation ist ein führender Materialveredler, -schmelzer, -hersteller und -lieferant für die weltweiten Elektronik-, Halbleiter-, Dünnschicht- und Wärmemanagementmärkte. Zu den Produkten gehören Lote und Flussmittel, Hartlote, Materialien für thermische Schnittstellen, Sputtertargets, Metalle und anorganische Verbindungen aus Indium, Gallium, Germanium und Zinn sowie NanoFoil. Das 1934 gegründete Unternehmen verfügt über einen weltweiten technischen Support und Fabriken in China, Deutschland, Indien, Malaysia, Singapur, Südkorea, dem Vereinigten Königreich und den Vereinigten Staaten.
Weitere Informationen über die Indium Corporation finden Sie unterindiumstg.wpenginepowered.comoder per E-Mail beiJingya Huang. Sie können auch unseren Experten von „From One Engineer To Another“ (, #FOETA) unterwww.linkedin.com/company/indium-corporation/oder@IndiumCorp folgen.
