Indium Corporation Experts to Present at IMAPS International Symposium on Microelectronics
September 27, 2023
Indium Corporation is proud to count three of its experts amongst the presenters participating in the technical program at the upcoming IMAPS International Symposium on Microelectronics, October 3-5 in San Diego, California, U.S.
First, on October 3, Senior Research Chemist Dr. Guangyu Fan will deliver a presentation titled Thermal Performance and Reliability of Liquid Metal Pastes with Solid Metal Particles as Thermal Interface Materials for Computing Electronics Cooling. Indium Corporation has developed gallium-based liquid metal pastes with low-content solid metal particle additives (LMPMPs) to improve thermal performance and control bondline thickness in thermal interface materials (TIMs). These materials, which are synthesized by introducing gallium oxide into liquid metal alloys, were extensively studied for their thermal properties and reliability through power cycling tests. The research highlights the significant impact of power density, bondline thickness, and various liquid metal alloys on the thermal properties of LMPMPs, which were found to outperform polymer-based thermal grease in terms of thermal performance.
Later in the afternoon, Product Development Specialist for Thermal Interface Materials Miloš Lazić's presentation, A Jettable and Dispensable Liquid Metal Paste as Thermal Interface, will examine the thermal conductivity, viscosity, and jetting and dispensing performance of newly developed liquid metal paste thermal interface materials (LMP TIMs) compared to traditional metals TIMs. Generally, metal TIMs have high thermal conductivity and can be applied in a thin layer. Recently, liquid metal TIMs are getting more attention, especially in gaming and high-performance applications. They are excellent in terms of accommodating imperfections of the materials they are connecting but can be risky because of their physical properties. To overcome this challenge, LMP TIMs were developed.
Lastly, on October 5, Product Specialist for Semiconductor and Advanced Assembly Materials Evan Griffith will give a presentation titled Optimizing Type 7 Solder Paste Formulation and Compatibility with Assembly Technology for Sub-75um System-in-Package Applications. Solder paste printing is the preferred method for System-in-Package (SiP) assembly, but as components shrink and stencil openings become smaller, consistent printing performance remains a challenge. Additionally, in fine-pitch applications with reduced component standoff height, cleanability becomes a concern, especially when using water-soluble pastes as pure DI water becomes less effective. Griffith will investigate important parameters, from a materials supplier's perspective, for meeting the challenges of fine-feature solder paste printing and package assembly. The presentation will examine innovations in solder powder technology which allow for consistent solder paste (Type 7) printing at 60um apertures, and the effects of laser-cut and electroform stencil manufacturing designs on solder paste print consistency. Finally, Griffith will explore solder paste cleanability.
Dr. Fan joined Indium Corporation in 2011. He has a doctorate degree in polymer chemistry and physics, a master's degree in polymer chemistry, and a bachelor's degree in chemistry. He is also a graduate of the Dale Carnegie Leadership Skills for Success program.
Lazić is responsible for developing new thermal materials and products, and providing solutions for customer challenges and applications. He also develops new testing methods to evaluate power and thermal products, and gathers data on new and existing products for marketing presentations. He earned his master's degree in electronics engineering and his bachelor's degree in electrical engineering from the University of Nis in Serbia. He is an Energy Efficiency Engineer certified by the Serbian Chamber of Engineers in Belgrade; a Certified SMT Process Engineer; and is fluent in English, Serbian, Croatian, and Bosnian.
Griffith is responsible for researching and analyzing customer and market data, and facilitating current and prospective customers' needs. Additionally, he supports customers' inquiries, internal product trainings, and works closely with Indium Corporation's R&D team on new applications. He earned his Bachelor of Engineering degree in Materials Science, graduating with honors, and his Master of Engineering Management degree from the Thayer School of Engineering at Dartmouth College, Hanover, N.H., U.S. He has also earned his Six Sigma Green Belt.
About Indium Corporation
Indium Corporation® is a premier materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Germany, India, Malaysia, Singapore, South Korea, the United Kingdom, and the U.S.
For more information about Indium Corporation, visit www.indium.com or email Jingya Huang. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.linkedin.com/company/indium-corporation/.