PCIM 2018 Preview
Seth Homer, Product Manager Engineered Solders, talks Indium Corporation's InFORMS® and LV1000 flux coating, which are being featured at ...
Seth Homer, Product Manager Engineered Solders, talks Indium Corporation's InFORMS® and LV1000 flux coating, which are being featured at ...
Seth Homer, Product Manager Engineer Solders, and Phil Zarrow discuss Indium Corporation’s InFORMS® preforms and patent-pending ribbon ...
At Indium Corporation, we're redefining how we use solder at the die-attach, DBC to baseplate, and baseplate to heat-sink levels so we can achieve...
As we've discussed, there are three attach levels of peak concern in the IGBT stack up. At Indium Corporation, we're redefining how we use sol...
As discussed in video one of this four video series, there are three attach levels of peak concern in the IGBT stack up. By redefining how we use sold...
In this series, Seth explores considerations for redefining solder at three attach levels of peak concern in the IGBT stackup: the die level, the subs...
Soldering IGBTs: Focus on the direct-bond copper substrate level of the stack-up....
The relentless push for higher power densitys, coupled with higher power cycling, demands a lot from IGBTs....
Flux-coated preforms allow you to reduce the amount of flux that’s presented to the joint and increase the solder volume. SMT expert Phil ...
Today’s technology simplifies the translation of an idea into a design. A drawing can be dimensioned in an instant. Thermal models and str...
In my last blog post, I gave a brief overview of the attributes and advantages of our new LV1000 flux coating formulation. I also discussed the ...